Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM C73-17
Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)
Přeložit název
NORMA vydána dne 1.6.2017
Informace o normě:
Označení normy: ASTM C73-17
Poznámka: NEPLATNÁ
Datum vydání normy: 1.6.2017
Kód zboží: NS-687792
Počet stran: 2
Přibližná hmotnost: 6 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM C73-17 :
Keywords:
absorption, brick, calcium silicate face brick, compressive strength, masonry units, sand-lime brick,, ICS Number Code 91.100.15 (Mineral materials and products)
Doplňující informace
| 1. Scope | ||||
|
1.1 This specification covers brick made principally from sand and lime and intended for use in brick masonry. Two grades of brick are covered: 1.1.1 Grade SW—Brick intended for use where exposed to temperature below freezing in the presence of moisture. Note 1: As a typical example, brick used for foundation
courses and parapets in the northeastern quarter of the United
States should conform to Grade SW.
1.1.2 Grade MW—Brick intended for use where exposed to temperature below freezing but unlikely to be saturated with water. Note 2: As a typical example, brick exposed in the face of the
wall other than parapet or foundations, or brick intended for
structures located in regions of the United States characterized by
less severe frost action or by drier climate than is found in the
northeastern quarter of the United States should conform to Grade
MW.
1.1.3 When the term brick is used in this specification, it is understood to mean brick or solid masonry units. 1.2 If brick having a particular color, texture, finish, or uniformity is desired, these features shall be specified separately by the purchaser. 1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||
| 2. Referenced Documents | ||||
|
Doporučujeme:
