Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Methods for Asbestos-Cement Pipe (Includes all amendments And changes 5/2/2019).
Automaticky přeložený název:
Standardní Zkušební metody pro azbestocementové potrubí
NORMA vydána dne 1.11.2011
Označení normy: ASTM C500/C500M-07(2011)e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2011
Kód zboží: NS-13715
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
asbestos, asbestos-cement, asbestos-cement pipe, pipe, ICS Number Code 23.040.50 (Pipes and fittings of other materials)
1. Scope | ||||||||||||||||||
1.1 These test methods cover the testing of asbestos-cement pipe for hydrostatic strength, flexural strength, crushing strength, straightness, and uncombined calcium hydroxide; they are for use in conjunction with the individual product specifications for asbestos-cement pipe. 1.2 Test methods appear in the following
sections:
1.3 Guidelines for internal and external corrosion included in Section 9 serve as an aid in determining the type of pipe which should be specified to maximize service life for a particular application. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 WarningBreathing of asbestos dust is hazardous. Asbestos and asbestos products present demonstrated health risks for users and for those with whom they come into contact. In addition to other precautions, when working with asbestos-cement products, minimize the dust that results. For information on the safe use of chrysoltile asbestos, refer to “Safe Use of Chrysotile Asbestos: A Manual on Preventive and Control Measures.” 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific safety hazard, see 1.5. ^REFERENCE: ASTM Standards: D1067 Test Methods for Acidity or Alkalinity of Water D1126 Test Method for Hardness in Water D2946 Terminology for Asbestos and Asbestos–Cement Products E11 Specification for Woven Wire Test Sieve Cloth and Test Sieves E200 Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis BNQ Standard: BNQ 3807-098 Vulcanized Rubber: Hardness Determination Other Standard: Regulation No. 3, Formula for Completely and Specifically Denatured Alcohol |
||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||
|
Historická
1.7.2013
Historická
1.11.2011
Historická
1.2.2014
Historická
1.2.2014
Historická
1.2.2014
Historická
1.2.2014
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 17.05.2024 (Počet položek: 2 902 148)
© Copyright 2024 NORMSERVIS s.r.o.