Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM C478-11
Standard Specification for Precast Reinforced Concrete Manhole Sections
Automaticky přeložený název:
Standardní specifikace pro Montovaný železobeton průlez oddílech
NORMA vydána dne 1.11.2011
Informace o normě:
Označení normy: ASTM C478-11
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2011
Kód zboží: NS-13584
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM C478-11 :
Keywords:
absorption, acceptance criteria, base sections, compressive strength, concrete, cone tops, design, flat slab tops, grade rings, ladders, manhole, manufacture, reinforced, riser sections, sewer, steps, tests, water, Base sections, Flat slab tops, Grade rings, Manhole materials/applications--specifications, Pond/canal/reservoir/ditch linings--specifications, Precast concrete products--specifications, Risers and conical tops, Steps and ladders, ICS Number Code 13.060.30 (Sewage water)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers the manufacture and purchase requirements of products used for the assembly and construction of circular vertical precast reinforced concrete manholes and structures used in sewer, drainage, and water works. 1.2 Part I, Sections 1-11, of this specification presents general requirements and requirements that are common to each precast concrete product covered by this specification. 1.3 Part II of this specification
presents specific requirements for each manhole product in the
following sections:
Note 1—Future products will to be included in Part II in a future revision of this specification. 1.4 This specification is the inch-pound companion to Specification C478M; therefore, no SI equivalents are presented in the specification. Note 2—This specification is a manufacturing and purchase specification only and does not include requirements for backfill, or the relationship between field load conditions and the strength requirements of the manhole products and appurtenances. Experience has shown, however, that the successful performance of this product depends upon the proper selection of the product strength, type of foundation and backfill, and care in the field installation of the manhole products and connecting pipes. The owner of the project for which these products are specified herein is cautioned to require inspection at the construction site. |
||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||||||
|
Doporučujeme:
