Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM C270-14
Standard Specification for Mortar for Unit Masonry
Automaticky přeložený název:
Standardní specifikace pro Malty pro Unit zednářství
NORMA vydána dne 1.6.2014
Informace o normě:
Označení normy: ASTM C270-14
Poznámka: NEPLATNÁ
Datum vydání normy: 1.6.2014
Kód zboží: NS-12774
Počet stran: 14
Přibližná hmotnost: 42 g (0.09 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM C270-14 :
Keywords:
air content, compressive strength, masonry, masonry cement, mortar, portland cement-lime, water retention, water retentivity, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers mortars for use in the construction of non-reinforced and reinforced unit masonry structures. Four types of mortar are covered in each of two alternative specifications: (1) proportion specifications and (Note 1: When the property specification is used to qualify masonry mortars, the testing agency performing the test methods should be evaluated in accordance with Practice C1093. 1.2 The proportion or property specifications shall govern as specified. 1.3 When neither proportion or property specifications are specified, the proportion specifications shall govern, unless data are presented to and accepted by the specifier to show that mortar meets the requirements of the property specifications. 1.4 This standard is not a specification to determine mortar strengths through field testing (see Section 3). 1.5 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.6 The terms used in this specification are identified in Terminologies C1180 and C1232. 1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.8 The following safety hazards caveat pertains
only to the test methods section of this specification:
Standard Test Methods for Measurement of
Masonry Flexural Bond Strength Standard Specification for Masonry
Cement Standard Performance Specification for
Hydraulic Cement Standard Terminology of Mortar and Grout
for Unit Masonry Standard Terminology for Masonry Standard Test Methods for Physical
Testing of Quicklime, Hydrated Lime, and Limestone Standard Test Method for Relative Density
(Specific Gravity) and Absorption of Fine Aggregate Standard Specification for Aggregate for
Masonry Mortar Standard Specification for Portland
Cement Standard Test Method for Density of
Hydraulic Cement Standard Specification for Hydrated Lime
for Masonry Purposes Standard Practice for Mechanical Mixing
of Hydraulic Cement Pastes and Mortars of Plastic Consistency Standard Practice for Accreditation of
Testing Agencies for Masonry Standard Specification for Quicklime for
Structural Purposes Standard Test Method for Compressive
Strength of Hydraulic Cement Mortars (Using 50?mm [2 in.] Cube
Specimens) Standard Specification for Pigments for
Integrally Colored Concrete Standard Test Method for Bond Strength of
Mortar to Masonry Units (Withdrawn 2018) Standard Test Methods for Preconstruction
and Construction Evaluation of Mortars for Plain and Reinforced
Unit Masonry Standard Specification for Blended
Hydraulic Cements Standard Specification for Mixing Rooms,
Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the
Testing of Hydraulic Cements and Concretes Standard Test Method for Examination and
Analysis of Hardened Masonry Mortar (Includes all amendments and
changes 1/4/2024). Hot and Cold Weather Masonry Construction
Manual, January 1999 Standard Specification for Mortar
Cement Standard Specification for Admixtures for
Masonry Mortars Standard Specification for Lime Putty for
Structural Purposes Standard Test Method for Water Retention
of Hydraulic Cement-Based Mortars and Plasters Standard Guide for Quality Assurance of
Mortars Standard Test Methods of Conducting
Strength Tests of Panels for Building Construction Standard Test Method for Water
Penetration and Leakage Through Masonry Standard Test Methods for Flexural Bond
Strength of Masonry |
Doporučujeme:
Aktualizace technických norem
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
