Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM C217/C217M-20
Standard Test Method for Weather Resistance of Slate
Přeložit název
NORMA vydána dne 15.5.2020
Informace o normě:
Označení normy: ASTM C217/C217M-20
Poznámka: NEPLATNÁ
Datum vydání normy: 15.5.2020
Kód zboží: NS-999931
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM C217/C217M-20 :
Keywords:
dimension stone, durability, slate, stone, test, weather resistance,, ICS Number Code 91.100.15 (Mineral materials and products)
Doplňující informace
| Significance and Use | ||||
|
4.1?This test method is useful in indicating the differences in weather resistance between various slates. This test method provides one element in the comparison of slates. |
||||
| 1. Scope | ||||
|
1.1?This test method covers two procedures for weather resistance of slate in all outdoor installations by determining the depth of softening by a shear/scratch tester or by hand scraping after soaking in 1 % sulfuric acid. Note 1:?The test is based on the fact that slates containing
pyrite, calcite, and carbon undergo a chemical weathering which
results in the conversion of the calcite particles to gypsum. The
swelling action that results causes disintegration of the slate.
The extent of this action on various slates in the test has been
found to correlate with the durability of the materials in actual
weathering.
1.2?The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.3?This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||
| 2. Referenced Documents | ||||
|
Doporučujeme:
