Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Density and Air Content (Pressure Method) of Freshly Mixed Roller-Compacted ConcretePřeložit název
NORMA vydána dne 15.6.2017
Označení normy: ASTM C1849/C1849M-17
Datum vydání normy: 15.6.2017
Kód zboží: NS-688513
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
air content, calibration, correction factor, density, measuring bowl, meter, pressure, RCC, roller-compacted concrete, unit weight,, ICS Number Code 91.100.30 (Concrete and concrete products)
|Significance and Use|
4.1 The test determines the air content of freshly mixed RCC exclusive of any air that may exist inside voids within aggregate particles. For this reason, it is applicable to concrete made with normal-density or high-density aggregate particles and requires determination of the aggregate correction factor described in Test Method .
4.2 If the concrete being tested contains aggregate that would be retained on a 50-mm (2-in.) sieve, the air content of the total mixture is only approximated by the test.
4.3 The test determines the density of freshly mixed RCC containing aggregate with a maximum size not greater than 50-mm (2-in.).
4.4 The air content of hardened RCC may be either higher or lower than that determined by this test method. This depends upon the methods and amount of consolidation effort applied to the RCC from which the hardened concrete specimen is taken; uniformity and stability of the air bubbles in the fresh RCC; accuracy of the microscopic examination, if used; stage in the delivery at which the air content of the unhardened RCC is determined; and other factors.
1.1 This test method covers the determination of density and air content of freshly mixed roller-compacted concrete (RCC) using the apparatus described in Test Method and the vibrating hammer described in Test Method .
1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
Note 1: Sieve size is identified by its standard designation in Specification . The alternative designation given in parentheses is for information only and does not represent a different standard sieve size.
1.3 The text of this test method references notes and footnotes that provide explanatory information. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of this standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.)1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
Poslední aktualizace: 23.05.2022 (Počet položek: 2 568 759)
© Copyright 2022 NORMSERVIS s.r.o.