Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD (Includes all amendments and changes 7/27/2022).
Přeložit název
NORMA vydána dne 15.11.2020
Označení normy: ASTM C1577-20e1
Datum vydání normy: 15.11.2020
Kód zboží: NS-1069127
Počet stran: 24
Přibližná hmotnost: 72 g (0.16 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Beton. Betonové prefabrikáty
Vnější systémy odvádění odpadní vody
This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes and sewage. The reinforced concrete shall consist of cementitious materials, mineral aggregates and water, in which steel has been embedded in such a manner that the steel and concrete act together. The precast reinforced concrete box sections shall be produced with tongue and groove ends. The box section shall be cured using any of the following methods or combinations thereof: steam curing; water curing; and membrane curing. Compression tests for determining concrete compressive strength shall be allowed to be made on either standard rodded concrete cylinders or concrete cylinders compacted and cured in like manner as the box sections, or on cores drilled from the box section.
Keywords:
ICS Number Code 91.100.30 (Concrete and concrete products),93.030 (External sewerage systems)
1. Scope | ||||||||||||||||||||||||||||||||||||||||||||
1.1?This specification covers single-cell precast reinforced concrete box sections cast monolithically and intended to be used for the construction of culverts and for the conveyance of storm water, industrial wastes and sewage. Note 1:?This specification is primarily a manufacturing and
purchasing specification. However, standard designs per the AASHTO
LRFD Bridge Design Specifications are included and the criteria
used to develop these designs are given in Appendix X1. The successful performance
of this product depends upon the proper selection of the box
section, bedding, backfill, and care that the installation conforms
to the construction specifications. The purchaser of the precast
reinforced concrete box sections specified herein is cautioned that
proper correlation of the loading conditions and the field
requirements with the box section specified, and provision for
inspection at the construction site, are required.
1.2?The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||
|
Poslední aktualizace: 22.12.2024 (Počet položek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.