Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses (Includes all amendments And changes 12/24/2014).
Automaticky přeložený název:
Standardní specifikace pro Non - azbestové vlákno - cementové střešní Shakes , šindele, a břidlicemi s designovaným měnícími se profily a tloušťkách
NORMA vydána dne 1.7.2010
Označení normy: ASTM C1530/C1530M-04(2010)e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.7.2010
Kód zboží: NS-11726
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
accelerated weathering, breaking load, cement, efflorescence, fiber-cement, freeze/thaw test, frost resistance, inorganic fibers, mechanical properties, natural fiber, organic fibers, physical properties, roofing, shakes, shingles, slates, water tightness, weathering, weatherometer test, Cement materials/applications--specifications, Efflorescence, Fiber-cement products--specifications, Freeze-thaw test, Frost resistance, Accelerated weathering, Breaking load, Natural fibers
1. Scope | ||||||||||||||||||||||
1.1 This specification covers non-asbestos fiber-cement roofing shakes, shingles, and slates that are of designed varying profiles and thicknesses manufactured to provide the weather-exposed surfaces on roofs of buildings. 1.2 This specification does not include details of product installation or system performance. Refer to the manufacturer's installation literature for proper installation instructions, to Specification C1459 for roofing systems performance, and to Test Method E108 for levels of fire resistance. 1.3 This specification is not applicable to asbestos-cement or fiber-cement products as specified in Specifications C222 and C1225. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. |
||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||
|
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.