Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Methods for Chemical Analysis of Glass Sand (Includes all amendments And changes 10/8/2014).
Automaticky přeložený název:
Standardní zkušební metody pro chemickou analýzu sklářského písku
NORMA vydána dne 1.11.2009
Označení normy: ASTM C146-94a(2009)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2009
Kód zboží: NS-11374
Počet stran: 12
Přibližná hmotnost: 36 g (0.08 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
chemical analysis, glass sand, referee analysis, routine analysis, Iron oxide content, Loss on ignition (LOI), Referee methods, Routine analysis, Sand, Silica content, Spectrophotometry--atomic absorption, Spectroscopy--atomic absorption, Titania, Titanium oxide content, Total iron, Zirconium oxide content, Alkaline earths/alkalies, Aluminum oxide (Al2O3) content, Chemical analysis, Chromium oxide content, Flame emission spectroscopy, Glass sand, High-silica/-alumina sands
Significance and Use | ||||||||||||||
These test methods can be used to ensure that the chemical composition of the glass sand meets the compositional specification required for this raw material. These test methods do not preclude the use of other methods that yield results within permissible variations. In any case, the analyst should verify the procedure and technique used by means of a National Institute of Standards and Technology (NIST) standard reference material or other similar material of known composition having a component comparable with that of the material under test. A list of standard reference materials is given in the NIST Special Publication 260, current edition. |
||||||||||||||
1. Scope | ||||||||||||||
1.1 These test methods cover the chemical analysis of glass sands. They are useful for either high-silica sands (99 % + silica (SiO2)) or for high-alumina sands containing as much as 12 to 13 % alumina (Al2O3). Generally nonclassical, the test methods are rapid and accurate. They include the determination of silica and of total R2O3 (see 11.2.4), and the separate determination of total iron as iron oxide (Fe2O3), titania (TiO2), chromium oxide (Cr2O3), zirconia (ZrO2), and ignition loss. Included are procedures for the alkaline earths and alkalies. High-alumina sands may contain as much as 5 to 6 % total alkalies and alkaline earths. It is recommended that the alkalies be determined by flame photometry and the alkaline earths by absorption spectrophotometry. 1.2 These test methods, if followed in detail, will provide interlaboratory agreement of results. |
||||||||||||||
2. Referenced Documents | ||||||||||||||
|
Poslední aktualizace: 06.05.2024 (Počet položek: 2 897 584)
© Copyright 2024 NORMSERVIS s.r.o.