Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM C1325-22e1
Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units (Includes all amendments and changes 10/10/2023).
Přeložit název
NORMA vydána dne 15.6.2022
Informace o normě:
Označení normy: ASTM C1325-22e1
Datum vydání normy: 15.6.2022
Kód zboží: NS-1155556
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM C1325-22e1 :
This specification covers non-asbestos fiber-mat reinforced cementitious backer units manufactured to be dimensionally stable and suitable as either an unfinished substrate or as a substrate for decoration such as natural stone or tile on walls, floors, or decks in wet and dry areas. Flat sheets covered by this specification are divided into two types, according to their intended application: type A - sheets are intended for exterior applications as a substrate for other cladding materials, or as an unfinished substrate for decoration such as natural stone, tile, or coatings, and type B - Sheets are intended for covered exterior applications such as soffit areas, or for interior dry or wet area applications as a desired unfinished substrate or an unfinished substrate for decoration such as natural stone or tile, where substrate dimensional stability is required. These products are formed either with or without pressure and cured, either under natural or accelerated conditions, to meet the property requirements. Mechanical and physical properties shall be determined on an uncoated product wherever practical. The flexural strength, density value, and modulus of elasticity value shall be tested to meet the requirements prescribed.
Keywords:
acceptance, air cured, appearance, density, edge straightness, finish, flexural strength, glass mat cement sheet, inspection, interior wet area application, length and width tolerance, mechanical properties, minimum equilibrium strength, minimum wet strength, moisture content, moisture movement, nominal length, nominal thickness, nominal width, non-asbestos fiber-mat, packaging, physical properties, pressure cured, sampling, shipping, squareness tolerance, storage, supplementary requirements
Odebírejte informace o nově vydaných normách ZDARMA:
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
