Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
Automaticky přeložený název:
Standardní postup instalace a používání vnitra záření Control nátěrových systémů (IRCCS) v pozemním stavitelství
NORMA vydána dne 1.2.2014
Označení normy: ASTM C1321-14
Poznámka: NEPLATNÁ
Datum vydání normy: 1.2.2014
Kód zboží: NS-10674
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
low emittance, paint&mdash,high reflectance, paint&mdash,high temperature, paint&mdash,low emittance, paint&mdash,spray-applied, radiation, radiation control coating, radiation control coating&mdash,interior, ICS Number Code 91.120.10 (Thermal insulation of buildings)
Significance and Use | ||||||||||||||
4.1 This practice recognizes that effectiveness, safety, and durability of an IRCCS depends not only on the quality of the materials, but also on the proper installation. 4.2 Improper installation of an IRCCS will reduce its thermal effectiveness, cause fire risks and other unsafe conditions, and promote deterioration of the structure in which it is installed. Improper installation has the potential to create specific hazards that include: heat buildup in recessed lighting fixtures, deterioration of failure of electrical wiring components, and deterioration of wood structures and paint failure due to moisture accumulation. 4.3 This practice provides directions for the installation of IRCCS materials in a safe and effective manner. Actual conditions in existing buildings will vary greatly. 4.4 Requirements that are presented in this practice are both general and specific in nature. They are not intended as specific instructions unless so indicated. The user shall consult the manufacturer for application and installation methods. |
||||||||||||||
1. Scope | ||||||||||||||
1.1 This practice has been prepared for use by the designer, specifier, and applicator of IRCCS (Interior Radiation Control Coating Systems) for use in building construction. The scope contains instructions related to the use and installation of IRCCS, including a surface(s) having a far-infrared emittance of 0.25 or less that is sprayed or painted.1.2 This practice covers the installation process from pre-installation inspection through post-installation. It does not cover the production of the Interior Radiation Control Coating Materials. 1.3 This practice is not intended to replace the manufacturer's installation instructions, but it shall be used in conjunction with such instructions. This practice is not intended to supersede local, state, or federal codes. 1.4 This practice assumes that the installer possesses a good working knowledge of the application codes and regulations, safety practices, tools, equipment, and methods necessary for the installation of Interior Coating Materials. It also assumes that the installer understands the fundamentals of building construction that affect the installation of an IRCCS. 1.5 When the installation or use of Interior Radiation Control Coating Materials, accessories, and systems pose safety or health problems, the manufacturer shall provide the user appropriate current information regarding any known problems associated with the intended use of the products and shall also provide direction on protective measures to be employed for safe utilization. The user shall establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. 1.6 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
Standard Test Method for Determination of
Emittance of Materials Near Room Temperature Using Portable
Emissometers Standard Terminology Relating to Thermal
Insulation CPSC Guide to Home Wiring Hazards Available
from Consumer Product Safety Commission, https://www.cpsc.gov. NFPA 211 Standard for Chimneys, Fireplaces, Vents,
and Solid Fuel-Burning Appliances Standard Test Methods for Gravimetric
Determination of Water Vapor Transmission Rate of Materials Standard Test Method for Surface Burning
Characteristics of Building Materials (Includes all amendments and
changes 1/29/2024). NFPA 54 National Fuel Gas Code |
Poslední aktualizace: 04.11.2024 (Počet položek: 2 209 323)
© Copyright 2024 NORMSERVIS s.r.o.