Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Adjusting the Operational Sensitivity Setting of In-Plant Walk-Through Metal Detectors
Automaticky přeložený název:
Standardní praktiky pro Úprava operační nastavení citlivosti In- Plant průchozí Detektory kovů
NORMA vydána dne 10.12.1997
Označení normy: ASTM C1269-97
Poznámka: NEPLATNÁ
Datum vydání normy: 10.12.1997
Kód zboží: NS-10378
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
entry control, metal detection, metal detector, personnel screening, physical security, special nuclear material, walk-through metal detector
1. Scope | ||||||||
1.1 This practice covers a procedure for adjusting the operational sensitivity of in-plant walk-through metal detectors. Performance of this procedure should result with in-plant walk-through metal detectors being adjusted to an initial operational sensitivity setting suitable for performance testing. 1.2 This practice does not set test object specifications or specify specific test objects. These should be specified by the regulatory authority. 1.3 This practice uses information developed by Practice C1270, or an equivalent procedure, which identifies the critical test object (from a specified set of test objects), its critical orientation, and the critical test path through the detection zone. In the case of Practice C1270, the information is found on the detection sensitivity map(s) for each in-plant walk-through metal detector. 1.4 This practice is one of several developed to assist operators of nuclear facilities with meeting the metal detection performance requirements of the regulatory authorities (see Appendix). 1.5 This standard practice is neither intended to set performance levels nor limit or constrain technologies. 1.6 This practice does not address safety or operational issues associated with the use of walk-through metal detectors. 1.7 The values stated in SI units are to be regarded as standards. The values given in parentheses are for information only. |
||||||||
2. Referenced Documents | ||||||||
|
Poslední aktualizace: 09.05.2024 (Počet položek: 2 898 531)
© Copyright 2024 NORMSERVIS s.r.o.