Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications (Includes all amendments And changes 7/16/2018).
Automaticky přeložený název:
Standardní Guide pro střední těsnění pro uzavřené izolačních skel pro strukturální tmel zasklívání
NORMA vydána dne 1.6.2010
Označení normy: ASTM C1249-06a(2010)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.6.2010
Kód zboží: NS-10262
Počet stran: 12
Přibližná hmotnost: 36 g (0.08 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
adhesive failure, cohesive failure, edge seal, insulating glass, secondary seal, structural sealant, structural sealant glazing, Adhesive failure, Cohesive failure, Conventionally sealed insulating glass (IG) units, Durability--sealants, Edge seal/sealant, Insulating glass (IG), Sealants, Secondary sealants, SSG (structural sealant glazing), ICS Number Code 81.040.20 (Glass in building)
Significance and Use | ||||||||||||||||||||||||||||
It should be realized that the design of an IG unit edge seal for use in SSG systems is a collaborative effort of at least the IG unit fabricator, sealant manufacturer, and design professional, among others. This guide provides information on silicone sealants that are used for the secondary seal of IG units that are glazed into SSG systems. Information is also provided on the other major components of the IG unit edge seal, compatibility of components, durability, and quality assurance (QA). |
||||||||||||||||||||||||||||
1. Scope | ||||||||||||||||||||||||||||
1.1 This guide covers design and fabrication considerations for the edge seal of conventionally sealed insulating glass units, herein referred to as IG units. The IG units described are used in structural silicone sealant glazing systems, herein referred to as SSG systems. SSG systems typically are either two or four sided, glazed with a structural sealant. Other conditions such as one, three, five, six sided may be used. 1.2 This guides does not cover the IG units of other than conventional edge seal design (Fig. 1); however, the information contained herein may be of benefit to the designers of such IG units. 1.3 In an SSG system, IG units are retained to a metal framing system by a structural seal (Fig. 2). The size and shape of that seal, as well as numerous other SSG system design considerations, are not addressed in this guide. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.6 The committee with jurisdiction for this standard is not aware of any comparable standard guides published by other organizations. |
||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||
|
Historická
1.6.2014
Historická
1.4.2012
Historická
1.5.2013
Historická
15.11.2012
Historická
1.7.2011
Historická
1.8.2013
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.