Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM C1242-02a
Standard Guide for Selection, Design, and Installation of Exterior Dimension Stone Anchors and Anchoring Systems (Includes all amendments And changes 8/16/2017).
Automaticky přeložený název:
Standardní Průvodce pro výběr , design , a instalace Vnější dekoračního kamene Kotvy a kotevní systémy
NORMA vydána dne 10.11.2002
Informace o normě:
Označení normy: ASTM C1242-02a
Poznámka: NEPLATNÁ
Datum vydání normy: 10.11.2002
Kód zboží: NS-10215
Počet stran: 16
Přibližná hmotnost: 48 g (0.11 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM C1242-02a :
Keywords:
anchor backup structure, anchor materials, anchor types, design guide, installation guide, moisture protection for anchors, selection guide, stone anchors, stone design considerations, stone erection standards, stone joints, ICS Number Code 93.020 (Earth works. Excavations. Foundation construction. Underground works)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||||||||||||||||||
|
1.1 This guide covers the categories of anchors and anchoring systems and discusses the design principles to be considered in selecting anchors or systems that will resist gravity loads and applied loads. 1.2 This guide sets forth basic requirements for the design of stone anchorage and provides a practical checklist of those design considerations. 1.3 This guide pertains to: 1.3.1 The anchoring of stone panels directly to the building structure for support, 1.3.2 The anchoring of stone panels to subframes or to curtainwall components after these support systems are attached to the building structure, 1.3.3 The anchoring of stone panels to subframes or to curtainwall components with stone cladding preassembled before these support systems are attached to the building structure, and 1.3.4 The supervision and inspection of fabrication and installation of the above. 1.4 Observe all applicable regulations, specific recommendations of the manufacturers, and standards governing interfacing work. 1.5 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (See Tables 1 and 2.) |
||||||||||||||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||||||||||||||||||
|
Doporučujeme:
