Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials
Automaticky přeložený název:
Standardní praxe pro stanovení ekvivalentní bor Obsah jaderných materiálů
NORMA vydána dne 1.6.2015
Označení normy: ASTM C1233-15
Poznámka: NEPLATNÁ
Datum vydání normy: 1.6.2015
Kód zboží: NS-591303
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
boron, neutron absorption, nuclear materials, nuclear poisons ,, ICS Number Code 27.120.30 (Fissile materials and nuclear fuel technology)
Significance and Use | ||||||||||
4.1 Use of this standard practice yields an equivalent boron content (EBC) that can be used to characterize the neutron-absorbing properties of a nuclear material. The elements included in the calculation are typically chosen so that the EBC represents either the entire material (for example, for a moderator) or the impurities in the material (for example, for a nuclear fuel). This practice is typically used for materials in which thermal neutron absorption is undesirable. The EBC is not intended for use as an input to any neutronic calculation. The EBC factors in Table 1 were selected to represent neutron absorption in water reactors under normal operating conditions. It is the responsibility of the user to evaluate their suitability for other purposes. 1.1 This standard details a recommended
practice for the calculation of the Equivalent Boron Content (EBC)
for nuclear materials. The EBC is used to provide a measure of the
macroscopic neutron absorption cross section of a nuclear material.
EBC factors for the natural elements are determined from their
atomic masses and thermal neutron absorption cross sections. This
practice is illustrated by using EBC factors that are based on
thermal neutron (2200 m/s) absorption cross sections. Other EBC
factors may be used depending upon the actual neutron energy
spectrum.
1.2 The EBC is a characteristic of a homogeneous material. Characterization of inhomogeneous materials and calculation of neutron multiplication factors require techniques that are beyond the scope of this practice. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. |
||||||||||
2. Referenced Documents | ||||||||||
|
Historická
1.1.2015
Historická
1.7.2012
Historická
1.2.2015
Historická
1.6.2011
Historická
1.6.2012
Historická
1.1.2008
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 26.04.2024 (Počet položek: 2 896 057)
© Copyright 2024 NORMSERVIS s.r.o.