ASTM C416-97(2013)..
ASTM C417-05(2010)e1..
ASTM C455-07(2013)..
ASTM C456-13
ASTM C467-97(2008)..
ASTM C492-92(2013)..
Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM C1160-97(2012)
Standard Specification for Chemical-Resistant Carbon Brick (Withdrawn 2021)
Automaticky přeložený název:
Standardní specifikace pro chemicky odolné Carbon Brick
NORMA vydána dne 1.8.2012
Informace o normě:
Označení normy: ASTM C1160-97(2012)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.8.2012
Kód zboží: NS-9780
Počet stran: 2
Přibližná hmotnost: 6 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM C1160-97(2012) :
Keywords:
alkali resistant, brick, carbon brick, chemical-resistant, thermal shock resistant, ICS Number Code 81.080 (Refractories)
Doplňující informace
| 1. Scope | |
|
1.1 This specification covers machine made solid uncored carbon brick produced from either metallurgical or petroleum calcined coke, baked to a minimum 1850°F (1010°C), and suitable for use in masonry construction which will be exposed to various chemicals. These units are designed primarily for industries using hydrofluoric acid, fluoride salts, and high concentrations of alkalies such as sodium and potassium hydroxide. Carbon brick are normally used with carbon filled chemical-resistant mortars. Medium |
Chemical |
|
Nitric Acid, to 40 % |
R |
|
Hydrofluoric Acid, to 40 % |
R |
|
Blend—25 % Nitric, 10 % Hydrofluoric, 65 % Water |
R |
|
Hydrochloric Acid, to 35 % |
R |
|
Phosphoric Acid, to 75 % |
R |
|
Sulfuric Acid, to 50 % |
R |
|
Sodium Hydroxide, to 50 % |
R |
|
Potassium Hydroxide, to 50 % |
R |
Property
Value
Compressive Strength, psi (MPa), min
6000 (41)
Modulus of Rupture, psi (MPa), min
1500 (10)
Water Absorption, %, max
10
Ash,% , max
8
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
|
Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials |
|
|
Standard Test Method for Ash in a Graphite Sample |
|
|
Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick |
|
|
Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
