Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM C109/C109M-12
Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
Automaticky přeložený název:
Standardní zkušební metoda pro pevnost v tlaku hydraulické cementové malty ( Použití 2 -in. Nebo [ 50 mm ] Cube Vzorky )
NORMA vydána dne 15.12.2012
Informace o normě:
Označení normy: ASTM C109/C109M-12
Poznámka: NEPLATNÁ
Datum vydání normy: 15.12.2012
Kód zboží: NS-9415
Počet stran: 10
Přibližná hmotnost: 30 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM C109/C109M-12 :
Keywords:
compressive strength, hydraulic cement mortar, hydraulic cement strength, mortar strength, strength, ICS Number Code 91.100.10 (Cement. Gypsum. Lime. Mortar)
Doplňující informace
| Significance and Use | ||||||||||||||||||||||||||||||||||||||
|
4.1 This test method provides a means of determining the compressive strength of hydraulic cement and other mortars and results may be used to determine compliance with specifications. Further, this test method is referenced by numerous other specifications and test methods. Caution must be exercised in using the results of this test method to predict the strength of concretes. |
||||||||||||||||||||||||||||||||||||||
| 1. Scope | ||||||||||||||||||||||||||||||||||||||
|
1.1 This test method covers determination of the compressive strength of hydraulic cement mortars, using 2-in. or [50-mm] cube specimens. 1.2 This test method covers the
application of the test using either inch-pound or SI units. The
values stated in either SI units or inch-pound units are to be
regarded separately as standard. Within the text, the SI units are
shown in brackets. The values stated in each system may not be
exact equivalents; therefore, each system shall be used
independently of the other. Combining values from the two systems
may result in nonconformance with the standard.
1.3 Values in SI units shall be obtained by measurement in SI units or by appropriate conversion, using the Rules for Conversion and Rounding given in Standard IEEE/ASTM SI-10, of measurements made in other units. 1.4 This standard does not
purport to address all of the safety concerns, if any, associated
with its use. It is the responsibility of the user of this standard
to establish appropriate safety and health practices and determine
the applicability of regulatory limitations prior to use.
(
Standard Specification for Masonry
Cement Standard Specification for Plastic
(Stucco) Cement Standard Specification for Portland
Cement Standard Specification for Flow Table for
Use in Tests of Hydraulic Cement Standard Specification for Reference
Masses and Devices for Determining Mass and Volume for Use in
Physical Testing of Hydraulic Cements Standard Performance Specification for
Hydraulic Cement Standard Specification for Mortar
Cement IEEE/ASTM SI-10 Standard for Use of the International
System of Units (SI): The Modern Metric System Standard Test Method for Flow of
Hydraulic Cement Mortar Standard Practices for Force Calibration
and Verification of Testing Machines Standard Practice for Mechanical Mixing
of Hydraulic Cement Pastes and Mortars of Plastic Consistency Standard Test Method for Compressive
Strength of Hydraulic-Cement Mortars (Using Portions of Prisms
Broken in Flexure) Standard Specification for Mixing Rooms,
Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the
Testing of Hydraulic Cements and Concretes Standard Specification for Blended
Hydraulic Cements Standard Specification for Coal Ash and
Raw or Calcined Natural Pozzolan for Use in Concrete (Includes all
amendments and changes 4/3/2025). Standard Practice for Preparing Precision
and Bias Statements for Test Methods for Construction Materials
(Includes all amendments and changes 2/21/2025). Standard Specification for Standard
Sand Standard Specification for Slag Cement
for Use in Concrete and Mortars Standard Test Methods for Chemical
Analysis of Hydraulic Cement |
Doporučujeme:
