Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM B949-13

Standard Specification for General Requirements for Zinc and Zinc Alloy Products

Automaticky přeložený název:

Standard Specification pro všeobecné požadavky na zinku a zinek produkty

NORMA vydána dne 1.8.2013

Jazyk
Provedení	PDF - okamžité stažení - 1 761.10 Kč Tištěné - 1 761.10 Kč
Dostupnost	SKLADEM
Cena	1 761.10 Kč bez DPH
1 761.10 Kč

Informace o normě:

Označení normy: ASTM B949-13
Poznámka: NEPLATNÁ
Datum vydání normy: 1.8.2013
Kód zboží: NS-8893
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Výrobky z olova, zinku a cínu

Anotace textu normy ASTM B949-13 :

Keywords:
alloys, anode, block, casting, CGG, chemical analysis, chemical requirements, color code, hot-dip alloys ingot, jumbo, rolled zinc, wire, zinc, zinc alloy, ICS Number Code 77.150.60 (Lead, zinc and tin products)

Doplňující informace

1. Scope

1.1 This specification establishes general requirements, unless otherwise specified in the specific product specification, for ordering information, marking, and sampling for chemical analysis common to zinc and zinc alloy products and shall apply to Specifications B6, B69, B86, B240, B327, B418, B750, B792, B793, B833, B852, B860, B892, B894, B897, B907, and B943 to the extent referenced therein.

1.2 Although this specification establishes general requirements, it does not restrict that, by agreement between customer and supplier, these requirements may be altered by a customer to suit individual need.

1.3 The chemical composition, physical and mechanical properties, and all other requirements not included in this specification shall be prescribed in the product specification.

1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. This applies except where SI units only are specified.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

B907-16(2021)	Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
B908-22	Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
B6-23	Standard Specification for Zinc
B86-23	Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
B327-21	Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
B418-16a(2021)	Standard Specification for Cast and Wrought Galvanic Zinc Anodes (Includes all amendments and changes 4/12/2021).
B750-22	Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
B792-16(2021)	Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
B894-17	Standard Specification for ACuZinc5 (Withdrawn 2022)
B899-21	Standard Terminology Relating to Non-ferrous Metals and Alloys
B69-21	Standard Specification for Rolled Zinc
B240-22	Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
B793-16(2021)	Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
B833-20	Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
B852-16(2022)	Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
B860-18(2022)	Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
B892-10	Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
B897-23	Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot
E88-11(2017)	Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
E634-23	Standard Practice for Sampling Zinc and Zinc Alloys for Analysis by Spark Atomic Emission Spectrometry
B914-21	Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
B943-16(2022)	Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
B960-18(2022)	Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
E55-23	Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

Podobné normy:

ASTM B29-03(2009)..

Historická
1.10.2009

ASTM B749-03(2009)..

Historická
1.10.2009

ASTM B792-13

Historická
1.2.2013

ASTM B86-13

Historická
1.2.2013

ASTM B927/B927M-13..

Historická
1.10.2013

ASTM B952/B952M-13..

Historická
1.2.2013

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.