ASTM B391-09e1
ASTM B392-09e1
ASTM B393-09e1
ASTM B462-10e2
ASTM B493/B493M-14..
ASTM B495-10
Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM B914-13e1
Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel (Includes all amendments And changes 7/23/2019).
Automaticky přeložený název:
Standardní praktiky pro barevné kódy zinku a zinek ingotů pro použití v žárové zinkování z oceli
NORMA vydána dne 1.5.2013
Informace o normě:
Označení normy: ASTM B914-13e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2013
Kód zboží: NS-8771
Počet stran: 2
Přibližná hmotnost: 6 g (0.01 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM B914-13e1 :
Keywords:
Alloy A-1, Alloy A-2, Alloy A-3, Alloy A-4, Alloy A-5, Alloy A-6, Alloy S-1, aluminum-zinc alloys, color, color code, GALFAN, GALVALUME, galvanizing, hot-dip, non-ferrous metals, zinc, zinc alloys, zinc-aluminum alloys, ICS Number Code 77.150.99 (Other products of non-ferrous metals)
Doplňující informace
| Significance and Use | ||||||
|
4.1 The purpose of these color codes is to allow for quick identification of ingot bundles or jumbo ingots of alloys used for hot-dip galvanizing. Other than jumbo ingots, this standard is not intended to imply that each ingot will be color-coded but only that each ingot bundle be color coded. 4.2 Each ingot bundle or jumbo ingot shall be identified with the appropriate color code listed in Alloy |
UNSA |
ASTM |
Nominal Composition |
Color Code |
||
|
|
|
|
Al |
Other |
North AmericaB |
International |
|
Primary Zinc GradesC |
|
|
|
|
|
|
|
SHG |
(Z13001) |
B6 |
|
|
Yellow |
Yellow |
|
HG |
(Z14003) |
B6 |
|
|
Green |
Green |
|
PW |
(Z18005) |
B6 |
|
Pb–1.0 % |
Black |
Black |
|
CGG Alloys |
|
|
|
|
|
|
|
|
(Z80310) |
B852 |
0.25 |
|
Brown/Brown |
Yellow/Brown |
|
|
(Z80411) |
B852 |
0.35 |
|
Blue/Blue |
Yellow/Blue |
|
|
(Z80511) |
B852 |
0.45 |
|
Purple/Purple |
Yellow/Purple |
|
|
(Z80531) |
B852 |
0.45 |
Pb–0.02 % |
Red/Red |
Yellow/Red |
|
|
(Z80610) |
B852 |
0.55 |
|
Pink/Pink |
Yellow/Pink |
|
|
(Z80710) |
B852 |
0.65 |
|
Green/Green |
Yellow/Green |
|
|
(Z80810) |
B852 |
0.75 |
|
Black/Black |
Yellow/Black |
|
|
(Z80910) |
B852 |
1.00 |
|
Orange/Orange |
Yellow/Orange |
|
Master Alloys |
|
|
|
|
|
|
|
Type A-1 |
(Z30750) |
B860 |
10.0 |
High Purity |
Red/Green |
Yellow/Red/Green |
|
Type A-2 |
(Z31710) |
B860 |
10.0 |
Low Purity |
Red/Black |
Yellow/Red/Black |
|
Type A-3 |
(Z30503) |
B860 |
5.0 |
High Purity |
Red/Blue |
Yellow/Red/Blue |
|
Type A-4 |
(Z31510) |
B860 |
5.0 |
Low Purity |
Red/Yellow |
Yellow/Red/Yellow |
|
Type A-5 |
(Z31520) |
B860 |
4.0 |
High Purity |
Red/Brown |
Yellow/Red/Brown |
|
Type A-6 |
(Z30504) |
B860 |
4.0 |
Low Purity |
Red/Purple |
Yellow/Red/Purple |
|
Type S-1 |
(Z55710) |
B860 |
|
Sb–10.0 % |
Black/Green |
Yellow/Black/Green |
|
Specialty Alloys |
|
|
|
|
|
|
|
GALFAND |
(Z38510) |
B750 |
5.0 |
Mischmetal |
Purple/Blue |
Yellow/Purple/Blue |
|
GALVALUMEE |
|
|
55.0 |
Si–1.5 % |
Orange/Green |
Yellow/Orange/Green |
4.3 The color will be applied as a
stripe, or stripes, on two adjacent sides of the ingot bundle or
jumbo ingot. The color stripes will be applied to include the ingot
bundle foot.
4.4 When using multiple stripes, the colored stripes will be applied from left to right as indicated in 4.5 In the absence of a written agreement to the contrary between the supplier and end user, the North American color code will be the standard for all North American transactions; for all other transactions the International Color Code will be used.
1.1 This standard is published with the following objectives:
1.1.1 To establish standard color codes for zinc, zinc alloy and zinc master alloy ingot used by the Hot-Dip Galvanizing industry, and
1.1.2 To standardize the use and application of these color codes.
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.
|
EN 1179 |
Zinc and Zinc Alloys-Primary Zinc Available from Global Engineering Documents, 15 Inverness Way, East Englewood, CO 80112-5704, http://www.global.ihs.com. |
|
ISO 752 |
Zinc and Zinc Alloys-Primary Zinc Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org. |
|
Standard Specification for Zinc |
|
|
Standard Terminology Relating to Non-ferrous Metals and Alloys |
|
|
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
|
|
Standard Practice for Codification of Certain Zinc, Tin and Lead Die Castings (Withdrawn 2020) |
|
|
Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings |
|
|
Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel |
|
|
Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing |
Podobné normy:
Historická
1.10.2009
Historická
1.10.2009
Historická
1.10.2009
Historická
1.10.2010
Historická
1.5.2014
Historická
1.5.2010
Doporučujeme:
EviZak - všechny zákony včetně jejich evidence na jednom místě
Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !
Chcete vědět více informací? Podívejte se na tuto stránku.
