Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
Automaticky přeložený název:
Standardní zkušební metoda pro stanovení kovových složek slitiny wolframu a wolfram tvrdokovů X-Ray fluorescenční spektrometrie
NORMA vydána dne 1.10.2012
Označení normy: ASTM B890-07(2012)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2012
Kód zboží: NS-8642
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
absorption and enhancement effects, fusion, interelement effects, tungsten alloys, tungsten carbides, tungsten hardmetals, X-ray fluorescence spectrometry, ICS Number Code 71.040.50 (Physicochemical methods of analysis), 77.040.30 (Chemical analysis of metals)
Significance and Use | |
5.1 This test method allows the determination of the chemical composition of powdered and sintered tungsten-based hardmetals. This test method is not applicable to material which will not oxidize readily at high temperatures in air, such as tungsten/copper or tungsten/silver alloys. 5.2 This test method specified lithium-borate compounds for the glass fusion material. However, numerous other choices are available. These include other lithium-borate compounds, sodium carbonate and borate mixtures, and others. The methodology specified here is still applicable as long as the same fusion mixture is used for both standards and specimens. |
|
1. Scope | |
1.1 This test method describes a procedure for the determination of the concentration, generally reported as mass percent, of the metallic constituents of tungsten-based alloys and hardmetals utilizing wavelength dispersive X-ray fluorescence spectrometry (XRF). This test method incorporates the preparation of standards using reagent grade metallic oxides, lithium-borate compounds, and fusion techniques. This test method details techniques for preparing representative specimens of both powder and sintered tungsten-based material. This test method is accurate for a wide range of compositions, and can be used for acceptance of material to grade specifications. 1.2 This test method is applicable to mixtures of tungsten or tungsten carbide with additions of refractory metal carbides and binder metals. Table 1 lists the most common elemental constituents and their concentration range. Note that many of these occur as metallic carbides. Element |
Concentration, Mass % |
Chromium (Cr) |
0.05 - 5.0 |
Cobalt (Co) |
0.05 - 40 |
Hafnium (Hf) |
0.05 - 2.0 |
Iron (Fe) |
0.05 - 2.0 |
Molybdenum (Mo) |
0.05 - 5.0 |
Nickel (Ni) |
0.05 - 30 |
Niobium (Nb) |
0.05 - 15 |
Tantalum (Ta) |
0.05 - 30 |
Titanium (Ti) |
0.05 - 30 |
Vanadium (V) |
0.05 - 2.0 |
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials (Includes all amendments and changes 7/17/2023). |
|
Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis |
Historická
15.9.2014
Historická
1.11.2013
Historická
1.6.2012
Historická
1.6.2013
Historická
1.12.2012
Historická
1.12.2010
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.