Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use
Automaticky přeložený název:
Standard Specification pro elektrolyticky vyloučené povlaky Palladium-niklu pro strojírenství použití
NORMA vydána dne 1.12.2013
Označení normy: ASTM B867-95(2013)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.12.2013
Kód zboží: NS-8539
Počet stran: 10
Přibližná hmotnost: 30 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
ICS Number Code 25.220.40 (Metallic coatings)
1. Scope | |
1.1 Composition—This specification covers requirements for electrodeposited palladium-nickel coatings containing between 70 and 95 mass % of palladium metal. Composite coatings consisting of palladium-nickel and a thin gold overplate for applications involving electrical contacts are also covered. 1.2 Properties—Palladium is the lightest and least noble of the platinum group metals. Palladium-nickel is a solid solution alloy of palladium and nickel. Electroplated palladium-nickel alloys have a density between 10 and 11.5, which is substantially less than electroplated gold (17.0 to 19.3) and comparable to electroplated pure palladium (10.5 to 11.8). This yields a greater volume or thickness of coating per unit mass and, consequently, some saving of metal weight. The hardness range of electrodeposited palladium-nickel compares favorably with electroplated noble metals and their alloys Approximate Hardness (HK25) |
|
Gold |
50–250 |
Palladium |
75–600 |
Platinum |
150–550 |
Palladium-Nickel |
300–650 |
Rhodium |
750–1100 |
Ruthenium |
600–1300 |
1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Qualitative Adhesion Testing of Metallic Coatings |
|
Standard Practice for Preparation of Nickel for Electroplating with Nickel (Includes all amendments and changes 12/4/2020). |
|
Standard Guide for Cleaning Metals Prior to Electroplating (Includes all amendments and changes 12/7/2020). |
|
Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings (Includes all amendments and changes 5/14/2019). |
|
Standard Practice for Preparation of and Electroplating on Stainless Steel (Includes all amendments and changes 12/7/2020). |
|
Standard Guide for Preparation of High-Carbon Steel for Electroplating |
|
Standard Practice for Preparation of Low-Carbon Steel for Electroplating |
|
Standard Test Methods for Electrical Conductivity and Resistivity of Water |
|
Standard Practice for Commercial Packaging |
|
Standard Guide of Variables Sampling of Metallic and Inorganic Coatings |
|
Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings |
|
Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography |
|
Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor |
|
Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”) |
|
Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests |
|
Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals |
|
Standard Practice for Design of Articles to Be Electroplated on Racks |
|
Standard Terminology Relating to Electrical Contacts and Their Use |
|
Standard Practice for Preparation of Nickel Alloys for Electroplating |
|
Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry |
|
Standard Guide for Attribute Sampling of Metallic and Inorganic Coatings |
|
Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings |
|
Standard Test Method for Porosity In Gold Coatings On Metal Substrates By Paper Electrography (Withdrawn 2005) |
|
Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope |
|
Standard Terminology Relating to Electroplating |
|
Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating |
|
Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating |
|
Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section |
|
Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses |
|
Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts |
|
Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement |
|
Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement |
Historická
1.5.2014
Historická
1.11.2011
Historická
1.8.2014
Historická
1.4.2009
Historická
1.5.2009
Historická
1.5.2014
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.