ASTM F1147-05(2011)..
ASTM F1160-14
ASTM F1367-98(2011)..
ASTM F1594-95(2011)..
ASTM F1941-10
ASTM F1941M-07
Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM B699-86(2015)
Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel
Automaticky přeložený název:
Standardní specifikace pro Nátěry kadmia vakuově uložených na železa a oceli
NORMA vydána dne 1.3.2015
Informace o normě:
Označení normy: ASTM B699-86(2015)
Poznámka: NEPLATNÁ
Datum vydání normy: 1.3.2015
Kód zboží: NS-585708
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM B699-86(2015) :
Keywords:
cadmium coatings, vacuum deposited, vacuum deposited coatings, cadmium,, ICS Number Code 25.220.40 (Metallic coatings)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers the requirements for a cadmium coating vacuum-deposited on iron and steel basis metals. The coating is especially beneficial to those ferrous metals, heat treated to 46HRC and higher or having an ultimate tensile strength greater than 1500 MPa, wherein protection against corrosion and appearance are important (see Appendix X1). 1.2 Vacuum-deposited production items are normally free of hydrogen embrittlement, a danger when using electroplating processes for deposition. Vacuum deposition can handle large high-strength parts that cannot be conveniently mechanically plated in the rotating barrels. 1.3 The coating is provided in various thicknesses up to and including 12 μm (3.1) either in the as-deposited condition or with a supplementary finish (3.2). 1.4 The following precautionary caveat pertains
only to the test methods portion, Section 9, of this specification:
Standard Practice for Operating Salt
Spray (Fog) Apparatus Standard Test Method for Measurement of
Coating Thickness by the Beta Backscatter Method Standard Practice for Testing Chromate
Coatings on Zinc and Cadmium Surfaces Standard Guide for Preparation of
High-Carbon Steel for Electroplating Standard Practice for Preparation of and
Electroplating on Stainless Steel (Includes all amendments and
changes 12/7/2020). Standard Practice for Preparation of Iron
Castings for Electroplating Standard Guide for Cleaning Metals Prior
to Electroplating (Includes all amendments and changes
12/7/2020). Standard Guide for Selection of Sampling
Plans for Inspection of Electrodeposited Metallic and Inorganic
Coatings Standard Test Methods for Chemical
Analysis of Cadmium Standard Test Method for Mechanical
Hydrogen Embrittlement Evaluation of Plating/Coating Processes and
Service Environments Standard Test Method for Measurement of
Coating Thickness by X-Ray Spectrometry Standard Test Method for Measurement of
Thickness of Metallic Coatings by the Coulometric Method Standard Practice for Qualitative
Adhesion Testing of Metallic Coatings Standard Guide for Attribute Sampling of
Metallic and Inorganic Coatings Standard Specification for Cadmium Standard Test Method for Measurement of
Metal and Oxide Coating Thickness by Microscopical Examination of
Cross Section Standard Test Method for Measurement of
Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on
Magnetic Basis Metals (Includes all amendments and changes
5/18/2021). Standard Practice for Preparation of
Low-Carbon Steel for Electroplating |
Podobné normy:
Historická
1.10.2011
Historická
1.6.2014
Historická
1.6.2011
Historická
1.6.2011
Historická
1.12.2007
Historická
1.12.2007
Doporučujeme:
