Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
Automaticky přeložený název:
Standardní praktiky pro odvápňování a čištění zirkonia a slitiny zirkonu povrchy
NORMA vydána dne 1.5.2010
Označení normy: ASTM B614-10
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2010
Kód zboží: NS-7407
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
cleaning, descaling, zirconium, zirconium alloys, Descaling, Specimen preparation (general), Surface descaling/cleaning, UNS R60001 (Zr/Zr alloy for nuclear applications), UNS R60702 (Zr/Zr alloy for nonnuclear applications), UNS R60703 (Zr/Zr alloy for nonnuclear applications), UNS R60704 (Zr/Zr alloy for nonnuclear applications), UNS R60705 (Zr/Zr alloy for nonnuclear applications), UNS R60802 (Zr/Zr alloy for nuclear applications), UNS R60804 (Zr/Zr alloy for nuclear applications)
1. Scope | ||
1.1 This practice covers a cleaning and descaling procedure useful to producers, users, and fabricators of zirconium and zirconium alloys for the removal of ordinary shop soils, oxides, and scales resulting from heat treatment operations and foreign substances present as surface contaminants. 1.2 It is not intended that these procedures become mandatory for removal of any of the indicated soils but rather serve as a guide when zirconium and zirconium alloys are being processed in the wrought, cast, or fabricated form. 1.3 It is the intent that these soils be removed prior to chemical milling, joining, plating, welding, fabrication, and in any situation where foreign substances interfere with the corrosion resistance, stability, and quality of the finished product. 1.4 Unless a single unit is used, for example, solution concentrations in g/l, the values stated in either inch-pound or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. SI values cannot be mixed with inch-pound values. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Sections 2 and 6. |
||
2. Referenced Documents | ||
|
Historická
1.6.2010
Historická
1.5.2012
Historická
1.10.2009
Historická
1.10.2009
Historická
1.10.2009
Historická
1.10.2010
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 10.05.2024 (Počet položek: 2 898 481)
© Copyright 2024 NORMSERVIS s.r.o.