Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces
Automaticky přeložený název:
Standardní Pokyny pro odstraňování vodního kamene a čištění Titanium a Titanium Alloy povrchy
NORMA vydána dne 1.9.2011
Označení normy: ASTM B600-11
Poznámka: NEPLATNÁ
Datum vydání normy: 1.9.2011
Kód zboží: NS-7349
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
alpha case, cleaning, descaling, pickling, titanium, titanium alloy: Titanium (Ti)/alloys, Descaling, Surface descaling/cleaning, Titanium alloys, ICS Number Code 77.150.50 (Titanium products)
1. Scope |
1.1 This guide covers a cleaning and descaling procedure useful to producers, users, and fabricators of titanium and titanium alloys for the removal of ordinary shop soils, oxides, and scales resulting from heat treatment operations and foreign substances present as surface contaminants. 1.2 It is not intended that these procedures be mandatory for removal of any of the indicated soils but rather serve as a guide when titanium and titanium alloys are being processed in the wrought, cast, or fabricated form. 1.3 It is the intent that these soils be removed prior to chemical milling, joining, plating, fabrication, and in any situation where foreign substances interfere with the corrosion resistance, stability, and quality of the finished product. 1.4 Acid etching may be required following cleaning when the surface has an oxygen-contaminated layer or alpha case present. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. |
Historická
1.7.2013
Historická
1.5.2014
Historická
1.7.2013
Historická
1.7.2013
Historická
1.12.2013
Historická
1.7.2013
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.