Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
Přeložit název
NORMA vydána dne 1.4.2019
Označení normy: ASTM B577-19
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2019
Kód zboží: NS-945897
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
cuprous oxide in copper, embrittlement, hydrogen embrittlement of copper, test methods , UNS Alloy No. C10100, UNS Alloy No. C10200, UNS Alloy No. C10300, UNS Alloy No. C10400, UNS Alloy No. C10500, UNS Alloy No. C10700, UNS Alloy No. C11700, UNS Alloy No. C12000, UNS Alloy No. C12200, UNS Alloy No. C12400, UNS Alloy No. C14200,, ICS Number Code 77.120.30 (Copper and copper alloys)
Significance and Use | ||||||||||||
5.1 These test methods determine whether copper products will be resistant to embrittlement when exposed to elevated temperatures in a reducing atmosphere. 5.1.1 It is assumed that all who use these test methods will be trained personnel capable of performing these procedures skillfully and safely. It is expected that work will be performed in a properly equipped facility. |
||||||||||||
1. Scope | ||||||||||||
1.1 These test methods describe procedures for determining the presence of cuprous oxide (Cu1.2 The test methods appear in the following order:
1.3 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Poslední aktualizace: 01.11.2024 (Počet položek: 2 208 817)
© Copyright 2024 NORMSERVIS s.r.o.