Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM B508-16
Standard Specification for Copper Alloy Strip for Flexible Metal Hose
Přeložit název
NORMA vydána dne 1.4.2016
Informace o normě:
Označení normy: ASTM B508-16
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2016
Kód zboží: NS-641061
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM B508-16 :
Keywords:
copper alloy strip, flexible metal hose,, ICS Number Code 77.150.30 (Copper products)
Doplňující informace
| Significance and Use | ||||||||||||||||||||||||||
|
14.1 For purposes of determining compliance with the specified limits for requirements of the properties listed in the following table, an observed value or a calculated value shall be rounded as indicated in accordance with the rounding method of Practice E29:
|
||||||||||||||||||||||||||
| 1. Scope | ||||||||||||||||||||||||||
|
1.1 This specification establishes the requirements for annealed copper-alloy strip for the manufacture of flexible metal hose produced from Copper Alloy UNS Nos. C41100 and C50500. 1.1.1 The nominal compositions are as follows:
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. Grain size is given in SI units. 1.3 The following precautionary statement pertains
only to the test method portion, Section 13, of this specification:
Standard Test Methods for Chemical
Analysis of Copper Alloys Standard Test Methods for Determining
Average Grain Size Standard Practice for Sampling Copper and
Copper Alloys for the Determination of Chemical Composition Standard Test Methods for Chemical
Analysis of Copper and Copper Alloys (Photometric Methods) Standard Practice for Using Significant
Digits in Test Data to Determine Conformance with
Specifications Standard Terminology for Copper and
Copper Alloys (Includes all amendments and changes 8/8/2019). Standard Classification for Temper
Designations for Copper and Copper Alloys´Wrought and Cast
(Includes all amendments and changes 10/24/2018). | ||||||||||||||||||||||||||
Doporučujeme:
