Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM B401-04
Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
Automaticky přeložený název:
Standardní specifikace pro kompaktní Kruhové Soustředné - Lay -pletl hliníkových vodičů , Steel- Reinforced ( ACSR / COMP )
NORMA vydána dne 1.9.2004
Informace o normě:
Označení normy: ASTM B401-04
Poznámka: NEPLATNÁ
Datum vydání normy: 1.9.2004
Kód zboží: NS-6557
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM B401-04 :
Keywords:
aluminum conductors, aluminum conductors, steel-reinforced, aluminum electrical conductor, compact round stranded conductors, concentric-lay-stranded conductors, electrical conductor, electrical conductor-aluminum, steel-reinforced conductors, stranded conductors
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||
|
1.1 This specification covers compact round concentric-lay-stranded conductors made from aluminum 1350-H19 (extra hard) wires and round zinc-coated, aluminum-coated, or aluminum-clad steel core wires usually used in overhead lines. These conductors shall be constructed with one steel core wire surrounded by one or more layers of helically-laid compacted or otherwise shaped aluminum wires (Explanatory Note 1 and Note 2). 1.2 Compact ACSR covered by this specification has five types of steel core wire which are designated by abbreviations as follows (Explanatory NOTE 2). 1.2.1 ACSR/GA/COMPCompact ACSR using Class A zinc-coated steel wire, 1.2.2 ACSR/GB/COMPCompact ACSR using Class B zinc-coated steel wire, 1.2.3 ACSR/GC/COMPCompact ACSR using Class C zinc-coated steel wire, 1.2.4 ACSR/AZ/COMPCompact ACSR using aluminum-coated (aluminized) steel wire, and 1.2.5 ACSR/AW/COMPCompact ACSR using aluminum-clad steel wire. 1.3 The SI values of density and resistivity are to be regarded as standard. For all other properties the inch-pound values are to be regarded as standard and the SI units may be approximate. Note 1—Prior to 1975, aluminum 1350 was designated as EC aluminum. Note 2—The aluminum and temper designations conform to ANSI H35.1. Aluminum 1350 corresponds to Unified Numbering System A91350 in accordance with Practice E 527. |
||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||
|
Doporučujeme:
