Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Titanium and Titanium Alloy Bars and Billets
Přeložit název
NORMA vydána dne 1.11.2021
Označení normy: ASTM B348/B348M-21
Datum vydání normy: 1.11.2021
Kód zboží: NS-1044030
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
This specification covers annealed bars and grills made from titanium or its alloys. All material grades covered should conform to the required chemical composition requirements. Elements that are intentionally added to the melt should be identified, analyzed and reported in the chemical analysis. Specimens for tension tests should be machined and the tensile properties determined using a specified strain rate through the yield strength and at an increasing rate. Each annealed material may be furnished as either descaled, sandblasted, ground, or rough turned.
Keywords:
bar, billet, titanium, titanium alloy,, ICS Number Code 77.150.50 (Titanium products)
1. Scope |
1.1?This specification1.1.1?Grade 1UNS R50250. Unalloyed titanium, 1.1.2?Grade 2UNS R50400. Unalloyed titanium, 1.1.2.1?Grade 2HUNS R50400. Unalloyed titanium (Grade 2 with 58 ksi [400 MPa] minimum UTS), 1.1.3?Grade 3UNS R50550. Unalloyed titanium, 1.1.4?Grade 4UNS R50700. Unalloyed titanium, 1.1.5?Grade 5UNS R56400. Titanium alloy (6 % aluminum, 4 % vanadium), 1.1.6?Grade 6UNS R54520. Titanium alloy (5 % aluminum, 2.5 % tin), 1.1.7?Grade 7UNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.7.1?Grade 7HUNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi [400 MPa] minimum UTS), 1.1.8?Grade 9UNS R56320. Titanium alloy (3 % aluminum, 2.5 % vanadium), 1.1.9?Grade 11UNS R52250. Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.10?Grade 12UNS R53400. Titanium alloy (0.3 % molybdenum, 0.8 % nickel), 1.1.11?Grade 13UNS R53413. Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.12?Grade 14UNS R53414. Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.13?Grade 15UNS R53415. Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.14?Grade 16UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium, 1.1.14.1?Grade 16HUNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladiumm (Grade 16 with 58 ksi [400 MPa] minimum UTS), 1.1.15?Grade 17UNS R52252. Unalloyed titanium plus 0.04 to 0.08 % palladium, 1.1.16?Grade 18UNS R56322. Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium, 1.1.17?Grade 19UNS R58640. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum), 1.1.18?Grade 20UNS R58645. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 %0.08 % palladium, 1.1.19?Grade 21UNS R58210. Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon), 1.1.20?Grade 23UNS R56407. Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI), 1.1.21?Grade 24UNS R56405. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium, 1.1.22?Grade 25UNS R56403. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 % palladium, 1.1.23?Grade 26UNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium, 1.1.23.1?Grade 26HUNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi [400 MPa] minimum UTS), 1.1.24?Grade 27UNS R52254. Unalloyed titanium plus 0.08 to 0.14 % ruthenium, 1.1.25?Grade 28UNS R56323. Titanium alloy (3 % aluminum, 2.5 % vanadium plus 0.080.14 % ruthenium), 1.1.26?Grade 29UNS R56404. Titanium alloy (6 % aluminum, 4 % vanadium, extra low interstitial, ELI plus 0.08 to 0.14 % ruthenium), 1.1.27?Grade 30UNS R53530. Titanium alloy (0.3 % cobalt, 0.05 % palladium), 1.1.28?Grade 31UNS R53532. Titanium alloy (0.3 % cobalt, 0.05 % palladium), 1.1.29?Grade 32UNS R55111. Titanium alloy (5 % aluminum, 1 % tin, 1 % zirconium, 1 % vanadium, 0.8 % molybdenum), 1.1.30?Grade 33UNS R53442. Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium), 1.1.31?Grade 34UNS R53445. Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium), 1.1.32?Grade 35UNS R56340. Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon), 1.1.33?Grade 36UNS R58450. Titanium alloy (45 % niobium), 1.1.34?Grade 37UNS R52815. Titanium alloy (1.5 % aluminum), 1.1.35?Grade 38UNS R54250. Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron), and 1.1.36?Grade 41UNS R56461. Titanium alloy (6 % aluminum, 1 % iron). Note 1:?H grade material is identical to the corresponding
numeric grade (that is, Grade 2H = Grade 2) except for the higher
guaranteed minimum UTS, and may always be certified as meeting the
requirements of its corresponding numeric grade. Grades 2H, 7H,
16H, and 26H are intended primarily for pressure vessel
use.
1.2?The values state in either inch-pound units or SI units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. 1.3?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
Poslední aktualizace: 09.09.2024 (Počet položek: 2 346 212)
© Copyright 2024 NORMSERVIS s.r.o.