Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM B248M-12

Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)

Automaticky přeložený název:

Standard Specification pro všeobecné požadavky na slitiny mědi a slitin mědi Plate, plechů, pásů, a vývalky (metrické)

NORMA vydána dne 1.4.2012

Jazyk
Provedení	PDF - okamžité stažení - 2 203.80 Kč Tištěné - 2 203.80 Kč
Dostupnost	SKLADEM
Cena	2203.80 Kč bez DPH
2 203.80 Kč

Informace o normě:

Označení normy: ASTM B248M-12
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2012
Kód zboží: NS-5952
Počet stran: 13
Přibližná hmotnost: 39 g (0.09 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Výrobky z mědi

Anotace textu normy ASTM B248M-12 :

Keywords:

general requirements, plate, general requirements, rolled bar, general requirements, sheet, general requirements, strip, general requirements, wrought copper and copper alloys , Sulfur--Cu/Cu alloys, Combustion, Copper alloy plate/sheet/strip/rolled bar--specifications, General delivery requirements--Cu/Cu-alloy, Infrared (IR) analysis--metals/alloys, Sampling nonferrous metals/alloys, ICS Number Code 77.150.30 (Copper products)

Doplňující informace

Significance and Use

For the purposes of determining compliance with the specified limits for requirements of the properties listed in the following table and for dimensional tolerances, an observed value or a calculated value shall be rounded as indicated in accordance with the rounding method of Practice E29:

Property	Rounded Unit for Observed or Calculated Value

Chemical composition	nearest unit in the last
Hardness	right-hand significant digit
Electrical resistivity	used in expressing
Electrical conductivity	the limiting value

Tensile strength	nearest 5 MPa
Yield strength	nearest 5 MPa

Elongation:	nearest 1 %

Grain size:
Under 0.060 mm	nearest multiple of 0.005 mm
0.060 mm and over	nearest 0.01 mm

1. Scope

1.1 This specification establishes the general requirements common to several wrought product specifications. Unless otherwise specified in the purchase order or in an individual specification, these general requirements shall apply to copper and copper-alloy plate, sheet, strip, and rolled bar supplied under each of the following product specifications issued by ASTM: B36/B36M, B96/B96M, B103/B103M, B121/B121M, B122/B122M, B152/B152M, B169/B169M, B194, B422, B465, B534, B591, B592, B694, B740, B747, B768, and B888.

1.2 Units—This specification is the companion specification to inch-pound Specification B248.

2. Referenced Documents

B422-10	Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
B465-20	Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
B534-20	Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B591-20a	Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar (Includes all amendments and changes 10/8/2020).
B152/B152M-19	Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
B169/B169M-20	Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
B193-20	Standard Test Method for Resistivity of Electrical Conductor Materials
B194-22	Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B248-22	Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
B694-19	Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
B740-21	Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip
B747-20	Standard Specification for Copper-Zirconium Alloy Sheet and Strip
B768-22	Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet
B846-19a	Standard Terminology for Copper and Copper Alloys (Includes all amendments and changes 8/8/2019).
B888-12	Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
E8/E8M-24	Standard Test Methods for Tension Testing of Metallic Materials
E18-22	Standard Test Methods for Rockwell Hardness of Metallic Materials
E54-80(1996)	Standard Test Methods for Chemical Analysis of Special Brasses and Bronzes (Withdrawn 2002)
E62-89(1996)	Standard Test Methods for Chemical Analysis of Copper and Copper Alloys (Photometric Methods)
E75-76(1996)	Standard Test Methods for Chemical Analysis of Copper-Nickel and Copper-Nickel-Zinc Alloys
E106-83(1996)	Standard Test Methods for Chemical Analysis of Copper-Beryllium Alloys
E112-13(2021)	Standard Test Methods for Determining Average Grain Size
E118-89(1996)	Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys
E121-83(1996)	Standard Test Methods for Chemical Analysis of Copper-Tellurium Alloys
E255-23	Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
E478-08(2017)	Standard Test Methods for Chemical Analysis of Copper Alloys
E527-23	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
E50-17	Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
E53-07	Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry
B103/B103M-23	Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
B121/B121M-23	Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
B96/B96M-20	Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
B122/B122M-20	Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
B592-20	Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
B36/B36M-23	Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar