Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Guide for Preparation of High-Carbon Steel for Electroplating (Includes all amendments And changes 12/3/2020).
Automaticky přeložený název:
Standardní Příručka pro přípravu High - uhlíkové oceli pro Galvanotechnika
NORMA vydána dne 1.11.2014
Označení normy: ASTM B242-99(2014)e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2014
Kód zboží: NS-615103
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
ICS Number Code 25.220.20 (Surface treatment)
1. Scope | ||||||||
1.1 This guide is intended as an aid in establishing and maintaining a preparatory cycle for electroplating on high-carbon steel (Note 1) producing a minimum of hydrogen embrittlement and maximum adhesion of the electrodeposited metal. For the purpose of this guide, steels containing 0.35 % of carbon or more, and case-hardened low-carbon steel, are defined as high-carbon steels. There is no generally recognized definite carbon content dividing high from low-carbon steels for electroplating purposes. Note 1: Electroplating of plain high-carbon steel introduced
problems not found in similar operations on low-carbon steel.
During the cleaning and electroplating cycle, high-carbon steel
differs from low-carbon steel in regard to its greater tendency to
become embrittled and the greater difficulty in obtaining maximum
adhesion of the electrodeposit. The preparation of low-carbon steel
for electroplating is covered in Practice B183.
1.2 This guide does not apply to the electroplating of alloy steel. For methods of chromium electroplating directly on steel see Guide B177. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazards statement, see 3.1. |
||||||||
2. Referenced Documents | ||||||||
|
Historická
1.6.2011
Historická
1.12.2009
Historická
1.6.2012
Historická
1.6.2008
Historická
1.6.2013
Historická
1.10.2011
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 28.04.2024 (Počet položek: 2 896 137)
© Copyright 2024 NORMSERVIS s.r.o.