Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
Přeložit název
NORMA vydána dne 1.4.2020
Označení normy: ASTM B19-20
Datum vydání normy: 1.4.2020
Kód zboží: NS-992876
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
This specification establishes the requirements UNS C26000 brass sheets, strips, plates, bars, and disks (blanks) that are used for the manufacture of ammunition parts like cartridge cups and disks. Each product should be manufactured by hot working, cold working, and annealing processes to produce a uniform wrought structure having the temper specified for the finished product. This specification also contains information on the prescribed tensile strength and elongation for a given thickness of annealed and as-hot rolled materials, as well as the required tensile strengths for particular rolled temper designations.
Keywords:
bar, brass bar, brass disks (blanks), brass plate, brass sheet, brass strip, cartridge brass bar, cartridge brass disks (blanks), cartridge brass plate, cartridge brass sheet, cartridge brass strip, disks (blanks), plate, strip, UNS No. C26000,, ICS Number Code 77.150.30 (Copper products)
1. Scope | ||||||||||||||||||||||||||
1.1 This specification establishes the requirements for sheet, strip, plate, bar, and disks for the manufacture of ammunition component parts thereof from alloy UNS C26000. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units, which are provided for information only and are not considered standard. 1.2.1 Exception—Values given in inch-pound units are the standard except for grain size, which is stated in SI units. 1.3 The following safety caveat pertains only to the test method described in Section 10 of this specification. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||
|
Poslední aktualizace: 22.12.2024 (Počet položek: 2 217 000)
© Copyright 2024 NORMSERVIS s.r.o.