Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM A990/A990M-11e01

Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service (Includes all amendments And changes 6/11/2014).

Automaticky přeložený název:

Standardní specifikace pro odlitky , železa , niklu a chrómu a niklu slitin, speciálně Řízený pro tlakové Pojistné díly pro žíravé službu

NORMA vydána dne 1.5.2011

Jazyk
Provedení	Online zabezpečené PDF - 1 793.40 Kč Tištěné - 1 793.40 Kč
Dostupnost	do 1 pracovních dnů
Cena	1793.40 Kč bez DPH
1 793.40 Kč

Informace o normě:

Označení normy: ASTM A990/A990M-11e01
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2011
Kód zboží: NS-5225
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM A990/A990M-11e01 :

Keywords:

casting, iron-nickel-chromium, nickel alloy, pressure retaining

Doplňující informace

1. Scope

1.1 This specification covers iron-nickel-chromium and nickel alloy castings specially processed with restricted melt practices, weldability testing, and nondestructive examination (NDE) requirements.

1.2 A number of grades of iron-nickel-chromium and nickel alloy castings are included in this specification. Since these grades possess varying degrees of suitability for service in corrosive environments, it is the responsibility of the purchaser to determine which grade shall be furnished. Selection will depend on design and service conditions, mechanical properties, and corrosion-resistant characteristics.

1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3.1 This specification is expressed in both inch-pound units and in SI units; however, unless the purchase order or contract specifies the applicable M specification designation (SI units), the inch-pound units shall apply. Within the text, the SI units are shown in brackets or parentheses.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

A494/A494M-26	Standard Specification for Castings, Nickel and Nickel Alloy
A703/A703M-20a	Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts (Includes all amendments and changes 11/16/2020).
A743/A743M-21	Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A744/A744M-21a	Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service (Includes all amendments and changes 11/10/2021).
A802-A802M-95(2001)	Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
AWS A5.4,	Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding
A985/A985M-21	Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
E94-04	Standard Guide for Radiographic Examination
E165-09	Standard Practice for Liquid Penetrant Examination for General Industry
E186-20	Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings
E272-21	Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings
E280-21	Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings
E446-20	Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness
A351/A351M-24e1	Standard Specification for Castings, Austenitic, for Pressure-Containing Parts (Includes all amendments and changes 2/3/2025).
A903/A903M-99(2024)	Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
AWS A5.9,	Specification for Bare Stainless Steel Welding Electrodes and Rods
AWS A5.11/A5.11M,	Specification for Nickel and Nickel Alloy Welding Electrodes for Shielded Metal Arc Welding
AWS A5.14/A5.14M,	Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods
ASME/ANSI B16.34,	Valves-Flanged, Threaded, and Welding End
A488/A488M-24	Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.