Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM A961/A961M-21 1.9.2021 náhled

Doplňující informace

ASTM A961/A961M-21

Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

Přeložit název

NORMA vydána dne 1.9.2021

Jazyk
Provedení	PDF - okamžité stažení - 1 759.00 Kč Tištěné - 1 759.00 Kč
Dostupnost	SKLADEM
Cena	1 759.00 Kč bez DPH
1 759.00 Kč

Informace o normě:

Označení normy: ASTM A961/A961M-21
Poznámka: NEPLATNÁ
Datum vydání normy: 1.9.2021
Kód zboží: NS-1038083
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Potrubí a součásti potrubí obecně
Vysokokvalitní oceli

Anotace textu normy ASTM A961/A961M-21 :

Keywords:
alloy steel, carbon steel, fittings, flanges, forgings, general requirement, piping applications, pressure containing parts, stainless steel, temperature service applications—elevated, temperature service applications—high, valves,, ICS Number Code 23.040.01 (Pipeline components in general. Pipelines),77.140.20 (Steels of high quality)

Doplňující informace

1. Scope

1.1?This specification covers a group of common requirements that shall apply to steel flanges, forged fittings, valves, and parts for piping applications under any of the following individual product specifications:

Title of Specification

ASTM Designation

Forgings, Carbon Steel, for Piping Components

A105/A105M

Forgings, Carbon Steel, for General-Purpose Piping

A181/A181M

Forged or Rolled Alloy-Steel Pipe Flanges, Forged

A182/A182M

Fittings, and Valves and Parts for High Temperature
Service

Forgings, Carbon and Low Alloy Steel, Requiring Notch

A350/A350M

Toughness Testing for Piping Components

Forged or Rolled 8 and 9 % Nickel Alloy

A522/A522M

Steel Flanges, Fittings, Valves, and Parts

for Low-Temperature Service

Forgings, Carbon and Alloy Steel, for Pipe Flanges,

A694/A694M

Fittings, Valves, and Parts for High-Pressure
Transmission Service

Flanges, Forged, Carbon and Alloy Steel for Low

A707/A707M

Temperature Service

Forgings, Carbon Steel, for Piping Components with

A727/A727M

Inherent Notch Toughness

Forgings, Titanium-Stabilized Carbon Steel, for

A836/A836M

Glass-Lined Piping and Pressure Vessel Service

1.2?In case of conflict between a requirement of the individual product specification and a requirement of this general requirement specification, the requirements of the individual product specification shall prevail over those of this specification.

1.3?By mutual agreement between the purchaser and the supplier, additional requirements may be specified (see Section 4.1.2). The acceptance of any such additional requirements shall be dependent on negotiations with the supplier and must be included in the order as agreed upon between the purchaser and supplier.

1.4?The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text and the tables, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply, unless the M designation (SI) of the product specification is specified in the order.

1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

2. Referenced Documents

A1058-19	Standard Test Methods for Mechanical Testing of Steel Products´Metric
B880-14(2019)	Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
A967/A967M-17	Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A941-23	Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A836/A836M-14(2020)	Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
A751-21	Standard Test Methods and Practices for Chemical Analysis of Steel Products
A727/A727M-14(2019)	Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A707/A707M-19	Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A700-14(2019)	Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A522/A522M-22	Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A370-23	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A350/A350M-24	Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A275/A275M-23	Standard Practice for Magnetic Particle Examination of Steel Forgings
A182/A182M-24	Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A181/A181M-23	Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
A105/A105M-23	Standard Specification for Carbon Steel Forgings for Piping Applications
A694/A694M-16(2022)	Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
ASME	Boiler and Pressure Vessel CodeSection IX
E1916-11(2019)	Standard Guide for Identification of Mixed Lots of Metals
E709-21	Standard Guide for Magnetic Particle Testing
E381-22	Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E165/E165M-23	Standard Practice for Liquid Penetrant Testing for General Industry
A991/A991M-22	Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.