Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM A960-02a
Standard Specification for Common Requirements for Wrought Steel Piping Fittings (Includes all amendments And changes 8/16/2017).
Automaticky přeložený název:
Standardní specifikace pro společné požadavky pro tepaný ocelové potrubí Kování
NORMA vydána dne 10.9.2002
Informace o normě:
Označení normy: ASTM A960-02a
Poznámka: NEPLATNÁ
Datum vydání normy: 10.9.2002
Kód zboží: NS-5028
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM A960-02a :
Keywords:
austenitic stainless steel, corrosive service applications, ferritic/austenitic stainless steel, ferritic stainless steel, high strength low alloy steel, martensitic stainless steel, piping applications, pressure containing parts, pressure vessel service, stainless steel fittings, temperature service applications-elevated, temperature service applications-low, temperature service applications-moderate, ICS Number Code 23.040.40 (Metal fittings), 77.140.20 (Steels of high quality)
Doplňující informace
| 1. Scope |
|
1.1 This specification covers a group of common requirements that shall apply to wrought steel piping fittings covered in any of the following individual product specifications or any other ASTM specification that invokes this specification or portions thereof: A234/A234M Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and Elevated TemperaturesA403/A403M Specification for Wrought Austenitic Stainless Steel Piping Fittings A420/A420M Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service A758/A758M Specification for Butt-Welding, Wrought-Carbon Steel, Piping Fittings with Improved Notch Toughness A774/A774M Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures A815/A815M Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings A858/A858M Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service A860/A860M Specification for High-Strength Butt-Welding Fittings of Wrought High-Strength Low-Alloy Steel 1.2 In case of conflict between a requirement of the individual product specification and a requirement of this general requirement specification, the requirements of the individual product specification shall prevail over those of this specification. 1.3 By mutual agreement between the purchaser and the supplier, additional requirements may be specified (see 4.1.7). The acceptance of any such additional requirements shall be dependent on negotiations with the supplier and must be included in the order as agreed upon by the purchaser and supplier. 1.4 The values stated in either inch-pound units or SI units [metric] are to be regarded separately as standard. Within the text and the tables, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation [SI] of the product specification is specified in the order. |
Doporučujeme:
EviZak - všechny zákony včetně jejich evidence na jednom místě
Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !
Chcete vědět více informací? Podívejte se na tuto stránku.
