Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Textured Stainless Steel Sheet [Metric]
Automaticky přeložený název:
Standard Specification pro texturou plech z korozivzdorné oceli [Metric]
NORMA vydána dne 1.3.2016
Označení normy: ASTM A947M-16
Datum vydání normy: 1.3.2016
Kód zboží: NS-633374
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
This guide covers standard specification for stainless steel, textured sheets, especially for use in electronic packaging applications. The textured side or sides of the sheet shall be produced in such a manner that guarantees repeatability of the pattern over time. The texture of any sheet shall conform to the textured reference identification criteria: pattern orientation; pattern appearance; height of pattern; size of pattern; type of pattern; pattern repetition configuration; and pattern effect on far side of sheet. The heat chemical composition shall be reported and shall conform to the specified requirements. The material shall undergo all the tests and inspections such as appearance testing, tensile strength testing, and corrosion testing in indoor and outdoor environment.
Keywords:
appearance, certification, corrosion indoor environment, corrosion outdoor environment, data processing equipment, electrical requirements, enclosures, mechanical requirements, optical requirements, pattern, permissible variations, specific resistivity, stainless steel sheets, surface resistivity, telecommunication equipment, terminology, textured, thermal conductivity,, ICS Number Code 77.140.50 (Flat steel products and semi-products)
1. Scope | ||||||||||||||||||||||||||||||||
1.1 This specification covers stainless steel, textured sheets, especially for use in electronic packaging applications, for example, cabinet, rack, enclosure, and shelf constructions for telecommunication, computer, and data-processing equipment. 1.2 This specification applies to all finished flat-rolled stainless products specified by standards organizations such as International Standards Organization (ISO), American Society for Testing and Materials (ASTM), European Committee for Standardization (CEN), German Institute for Standardization (DIN), and others participating in a global standards harmonization effort. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. |
||||||||||||||||||||||||||||||||
2. Referenced Documents | ||||||||||||||||||||||||||||||||
|
Chcete mít jistotu o platnosti užívaných předpisů?
Nabízíme Vám řešení, abyste mohli používat stále platné (aktuální) legislativní předpisy.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 02.05.2024 (Počet položek: 2 896 910)
© Copyright 2024 NORMSERVIS s.r.o.