Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
Přeložit název
NORMA vydána dne 1.2.2017
Označení normy: ASTM A929/A929M-17
Poznámka: NEPLATNÁ
Datum vydání normy: 1.2.2017
Kód zboží: NS-676381
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
coatings´aluminum, coatings´metallic, coatings´zinc, coatings´zinc-5 % aluminum-Mischmetal, coatings´55 % aluminum-zinc alloy, corrugated steel pipe, pipe´corrugated steel, steel sheet´aluminum coated, steel sheet´hot-dip coated, steel sheet´metallic coated, steel sheet´zinc coated, steel sheet´zinc-5 % aluminum-Mischmetal alloy coated, steel sheet´55 % aluminum-zinc alloy coated,, ICS Number Code 77.140.50 (Flat steel products and semi-products)
1. Scope | ||||||||||||
1.1 This specification covers steel sheet used in the manufacture of corrugated steel pipe for storm sewers, culverts, drains, and similar uses. The sheet is metallic coated by the hot-dip process. Material for this use is furnished in coils, flat in cut lengths, and corrugated in cut lengths. Many metallic coated materials are covered in this material specification. Users must determine which product best serves their needs. Five different metallic coatings are included: 1.1.1 Zinc-coated (galvanized), 1.1.2 Zinc-5 % aluminum-Mischmetal (Zn-5Al-MM) alloy coated, 1.1.3 55 % aluminum-zinc (55Al-Zn) alloy coated, 1.1.4 Aluminum-coated Type 2 (aluminized Type 2), and 1.1.5 Aluminum-coated Type 1 (aluminized Type 1). 1.2 Zinc-coated sheet is available in two coating weights [masses]. Other metallic coatings are available in one coating weight [mass] only. 1.3 The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
Poslední aktualizace: 19.05.2024 (Počet položek: 2 902 277)
© Copyright 2024 NORMSERVIS s.r.o.