Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM A924/A924M-10a

Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process (Includes all amendments And changes 4/8/2013).

Automaticky přeložený název:

Standardní specifikace pro všeobecné požadavky na ocelový plech, Metallic - potažené Hot - Dip Process

NORMA vydána dne 1.11.2010

Jazyk
Provedení	Online zabezpečené PDF - 1 998.00 Kč Tištěné - 1 998.00 Kč
Dostupnost	SKLADEM
Cena	1998.00 Kč bez DPH
1 998.00 Kč

Informace o normě:

Označení normy: ASTM A924/A924M-10a
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2010
Kód zboží: NS-4834
Počet stran: 12
Přibližná hmotnost: 36 g (0.08 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM A924/A924M-10a :

Keywords:

aluminum-coated iron/steel, aluminum-zinc alloy-coated steel, 55 %, coating, coatingsaluminum, coatings55 % aluminum-zinc, coatingshot-dip, coatingsmetallic, coatingsterne metal, coatingszinc (hot-dip), coatingszinc-5 % aluminum, coatingszinc-aluminum-magnesium, corrosion, hot-dip, metallic-coated, sheet, steel, steel productshot-dip coatings, steel sheetaluminum-coated, steel sheetterne coated, steel sheetzinc-aluminum-magnesium alloy-coated, steel sheetzinc-coated (galvanized)

Doplňující informace

1. Scope

1.1 This specification covers the general requirements that, unless otherwise specified in the product specification, apply to steel sheet in coils and cut lengths, metallic-coated on continuous lines by the hot-dip process. The product is intended for applications requiring corrosion resistance. The product specifications contain requirements for specific strength levels, heat resistance, paintability, or formability, or a combination thereof.

1.2 Subject to individual product specification provisions, steel sheet is available as Commercial Steel (CS) Types A, B, and C, Forming Steel (FS), Drawing Steel (DS), Deep Drawing Steel (DDS), Extra Deep Drawing Steel (EDDS), High Temperature Steel (HTS), Structural Steel (SS), and High Strength Low Alloy Steel (HSLAS). Steel sheet is produced with the following metallic coatings. Specific information on each of the following is contained in the individual product specification:

2. Referenced Documents

A792/A792M-25a	Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
A929/A929M-24	Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A1073/A1073M-21	Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet
A1063/A1063M-25	Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1057/A1057M-25	Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1046/A1046M-25a	Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
A90/A90M-21	Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A370-24a	Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Includes all amendments and changes 10/29/2024).
A463/A463M-25b	Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
A653/A653M-25a	Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
A700-14(2019)	Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A751-25	Standard Test Methods and Practices for Chemical Analysis of Steel Products
A754/A754M-21	Standard Test Method for Coating Weight [Mass] of Metallic Coatings on Steel by X-Ray Fluorescence
A755/A755M-18(2024)	Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A875/A875M-25a	Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
A902-24	Standard Terminology Relating to Metallic Coated Steel Products
A428/A428M-21	Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E376-19	Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
Fed. Std. No. 123	Marking for Shipment (Civil Agencies)
A1079-25	Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A1030/A1030M-21	Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products

Doporučujeme:

Aktualizace technických norem

Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.

Chcete vědět více informací? Podívejte se na tuto stránku.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.