Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM A778-01(2009)e1
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products (Includes all amendments And changes 9/10/2015).
Automaticky přeložený název:
Standardní podmínky pro svařované ocelové, nežíhaných austenitická nerezová ocel trubkové výrobky
NORMA vydána dne 1.4.2009
Informace o normě:
Označení normy: ASTM A778-01(2009)e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.4.2009
Kód zboží: NS-4133
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM A778-01(2009)e1 :
Keywords:
austenitic stainless steel, stainless steel tubing, steel tubing, welded steel tubing, Austenitic stainless steel tube--specifications, Corrosive service applications--tube (steel), Stainless steel tube--specifications, Unannealed austenitic stainless steel tube, Welded steel tube--specifications, ICS Number Code 23.040.40 (Metal fittings)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||
|
1.1 This specification covers straight seam and spiral butt seam welded unannealed austenitic stainless steel tubular products intended for low and moderate temperatures and corrosive service where heat treatment is not necessary for corrosion resistance. Table 1 lists the five grades covered by this specification. The user of this specification should be aware that a minimum amount of testing and examination is required of the basic product. The user requiring additional testing or examination is referred to the supplemental requirements or Ordering Information, or both. Users requiring a tubular product with post-weld heat treatment or with radiographic examination are referred to Specification A 312/A 312M, A 358/A 358M, or A 409/A 409M, as applicable. 1.2 This specification covers welded unannealed tubular products 3 in. (75 mm) through 48 in. (1200 mm) in outside diameter and in nominal wall thicknesses of 0.062 in. (1.5 mm) through 0.500 in. (12.5 mm) produced to this specification. Tubular products having other diameters or wall thickness, or both, may be furnished provided it complies with all other requirements of this specification. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. |
||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||
|
Doporučujeme:
