Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM A755/A755M-16e1

Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products (Includes all amendments And changes 12/20/2018).

Přeložit název

NORMA vydána dne 1.5.2016

Jazyk
Provedení	Online zabezpečené PDF - 1 782.30 Kč Tištěné - 1 782.30 Kč
Dostupnost	SKLADEM
Cena	1782.30 Kč bez DPH
1 782.30 Kč

Informace o normě:

Označení normy: ASTM A755/A755M-16e1
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2016
Kód zboží: NS-641099
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Střechy

Anotace textu normy ASTM A755/A755M-16e1 :

Keywords:

coatings, nonmetallic, coatings, painted, coil-coating process, painted sheet, roofing materials, siding materials, steel sheet ,, ICS Number Code 91.060.20 (Roofs)

Doplňující informace

1. Scope

1.1 This specification covers steel sheet metallic coated by the hot-dip process and coil-coated with organic films for exterior exposed building products. Sheet of this designation is furnished in coils, cut lengths, and formed cut lengths. Building products include corrugated and various types of roll and brake-formed configurations.

1.2 The substrate is available in several different metallic-coated steel sheet products as enumerated in 4.1, depending on the requirements of the purchaser.

1.3 Coating systems supplied under this specification consist of a primer coat covered by various types and thicknesses of top coats. The combination of primer and top coat is classed as either a two-coat thin-film system or as a two-coat (or more) thick-film system. Typical top-coating materials are: polyester, silicone polyester, acrylic, fluoropolymer, plastisol, or polyurethane.

1.4 This specification is applicable to orders in either inch-pound units (as A755) or SI units [as A755M]. Values in inch-pound units and SI units are not necessarily equivalent. Within the text, SI units are shown in brackets. Each system shall be used independently of each other.

1.5 Unless the order specifies the “M” designation (SI units) the product shall be furnished to inch-pound units.

1.6 The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of this specification.

1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents

A463/A463M-25b	Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
D1005-95(2024)	Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
A792/A792M-25a	Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
A875/A875M-25a	Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
A902-24	Standard Terminology Relating to Metallic Coated Steel Products
D1186-01	Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006)
A924/A924M-25a	Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process (Includes all amendments and changes 1/14/2026).
A1046/A1046M-25a	Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).
A1063/A1063M-25	Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
B117-26	Standard Practice for Operating Salt Spray (Fog) Apparatus
D4145-10(2022)	Standard Test Method for Coating Flexibility of Prepainted Sheet
D4214-23	Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
D5796-24	Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device
G85-19	Standard Practice for Modified Salt Spray (Fog) Testing
D522-93a(2001)	Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
D1654-24	Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
D1735-21	Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
D2244-25	Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
D2247-25	Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity
D3359-23	Standard Test Methods for Rating Adhesion by Tape Test
D3363-22	Standard Test Method for Film Hardness by Pencil Test
D714-25	Standard Test Method for Evaluating Degree of Blistering of Paints
D822-23	Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D523-25	Standard Test Method for Specular Gloss
D659-86	Method of Evaluating Degree of Chalking of Exterior Paints (Withdrawn 1989)
D870-25	Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
A653/A653M-25a	Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process (Includes all amendments and changes 12/5/2025).

Odebírejte informace o nově vydaných normách ZDARMA:

Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.