Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM A749/A749M-14 1.5.2014 náhled

Doplňující informace

ASTM A749/A749M-14

Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

Automaticky přeložený název:

Standard Specification pro Steel Strip, Carbon a vysoce pevného nízkolegované, válcované za tepla, obecné požadavky na

NORMA vydána dne 1.5.2014

Jazyk
Provedení	PDF - okamžité stažení - 1 758.60 Kč Tištěné - 1 758.60 Kč
Dostupnost	SKLADEM
Cena	1 758.60 Kč bez DPH
1 758.60 Kč

Informace o normě:

Označení normy: ASTM A749/A749M-14
Poznámka: NEPLATNÁ
Datum vydání normy: 1.5.2014
Kód zboží: NS-4005
Počet stran: 8
Přibližná hmotnost: 24 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Kategorie - podobné normy:

Výrobky z ploché oceli a polotovary

Anotace textu normy ASTM A749/A749M-14 :

Keywords:
carbon, steel, strip, ICS Number Code 77.140.50 (Flat steel products and semi-products)

Doplňující informace

1. Scope

1.1 This specification covers the general requirements for hot-rolled steel strip in coils and cut lengths. It applies to carbon steel and high-strength, low-alloy steel furnished as hot-rolled.

1.2 This specification is not applicable to hot-rolled heavy-thickness carbon sheet and strip coils (Specification A1018/A1018M), cold-rolled carbon steel strip (Specification A109/A109M), high-strength, low-alloy cold-rolled steel (Specifications A606/A606M and A1008/A1008M) or cold-rolled high carbon steel (Specification A684/A684M).

1.3 In case of any conflict in requirements, the requirements of the individual material specification shall prevail over those of this general specification.

1.4 For the purposes of determining conformance with this and the appropriate product specification referenced under 1.5 Annex A1 lists permissible variations in dimensions and mass (Note 1) in SI [metric] units. The values listed are not exact conversions of the values listed in the inch-pound tables, but instead are rounded or rationalized values. Conformance to 1.6 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.7 This specification and the applicable material specifications are expressed in both inch-pound units and SI units. However, unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units.

2. Referenced Documents

A751-21	Standard Test Methods and Practices for Chemical Analysis of Steel Products
A941-23	Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A1018/A1018M-23a	Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength (Includes all amendments and changes 12/8/2023).
Fed. Std. No. 183	Continuous Identification Marking of Iron and Steel Products
Fed. Std. No. 123	Marking for Shipments (Civil Agencies)
MIL-STD-129	Marking for Shipment and Storage
E290-22	Standard Test Methods for Bend Testing of Material for Ductility
E29-22	Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
A1008/A1008M-23e1	Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable (Includes all amendments and changes 12/29/2023).
A606/A606M-23	Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
E11-22	Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
A568/A568M-19a	Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for (Includes all amendments and changes 11/22/2019).
A109/A109M-24	Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A370-23	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A684/A684M-17	Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A700-14(2019)	Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment