Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM A747/A747M-99
Standard Specification for Steel Castings, Stainless, Precipitation Hardening
Automaticky přeložený název:
Standardní specifikace pro ocelové odlitky , nerez, srážek kalení
NORMA vydána dne 10.5.1999
Informace o normě:
Označení normy: ASTM A747/A747M-99
Poznámka: NEPLATNÁ
Datum vydání normy: 10.5.1999
Kód zboží: NS-3999
Počet stran: 4
Přibližná hmotnost: 12 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM A747/A747M-99 :
Keywords:
steel castings, stainless steel, precipitation hardening stainless steel, ICS Number Code 77.140.80 (Iron and steel castings)
Doplňující informace
| 1. Scope | ||||||||||
|
1.1 This specification covers iron-chromium-nickel-copper corrosion-resistant steel castings, capable of being strengthened by precipitation hardening heat treatment. 1.2 These castings may be used in services requiring corrosion resistance and high strengths at temperatures up to 600°F [315°C]. They may be machined in the solution-annealed condition and subsequently precipitation hardened to the desired high-strength mechanical properties specified in Table 1 with little danger of cracking or distortion. 1.3 The material is not intended for use in the solution-annealed condition. Note-If the service environment in which the material is to be used is considered conducive to stress-corrosion cracking, precipitation hardening should be performed at a temperature that will minimize the susceptibility of the material to this type of attack.1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. |
||||||||||
| 2. Referenced Documents | ||||||||||
|
Doporučujeme:
