Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
Automaticky přeložený název:
Standard Specification pro Hot válcované konstrukční oceli, vysokopevnostní nízkolegované Plate se zlepšenými Tvařitelnost
NORMA vydána dne 15.10.2013
Označení normy: ASTM A656/A656M-13
Poznámka: NEPLATNÁ
Datum vydání normy: 15.10.2013
Kód zboží: NS-3557
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Keywords:
high-strength low-alloy steel, steel plates, structural applications, ICS Number Code 77.140.50 (Flat steel products and semi-products)
1. Scope | ||||||||||||
1.1 This specification covers three types and five strength grades of high-strength low-alloy, hot rolled structural steel plate for use in truck frames, brackets, crane booms, rail cars, and similar applications. Steels that conform to this specification offer improved formability. These steels are normally furnished in the as-rolled condition. The type and strength grade furnished is as agreed upon between the manufacturer and the purchaser. The types and strength grades are shown in the tables. 1.2 The maximum thickness of plates shall be as follows:
1.3 The values stated in either inch-pound units or SI units are to be regarded as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification. See Appendix X3 of Specification A6/A6M for information on weldability. 1.4 For plates produced from coil and furnished without heat treatment or with stress relieving only, the additional requirements, including additional testing requirements and the reporting of additional test results, of Specification A6/A6M apply. |
||||||||||||
2. Referenced Documents | ||||||||||||
|
Historická
1.11.2009
Historická
1.4.2013
Historická
1.11.2010
Historická
1.5.2014
Historická
1.5.2012
Historická
1.5.2012
Poslední aktualizace: 22.11.2024 (Počet položek: 2 206 568)
© Copyright 2024 NORMSERVIS s.r.o.