Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM A555/A555M-05
Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
Automaticky přeložený název:
Standardní specifikace pro všeobecné požadavky na drátu z nerezavějící oceli a válcovaného drátu
NORMA vydána dne 1.9.2005
Informace o normě:
Označení normy: ASTM A555/A555M-05
Poznámka: NEPLATNÁ
Datum vydání normy: 1.9.2005
Kód zboží: NS-3083
Počet stran: 6
Přibližná hmotnost: 18 g (0.04 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Anotace textu normy ASTM A555/A555M-05 :
Keywords:
general delivery requirements, stainless steel wire, stainless steel wire rods, ICS Number Code 77.140.65 (Steel wire, wir ropes and link chains)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||||||||||||||
|
1.1 This specification covers general requirements that shall apply to stainless wire and wire rods. Wire rods are a semifinished product intended primarily for the manufacture of wire. Wire is intended primarily for cold forming, including coiling, stranding, weaving, heading and machining as covered under the latest revision of each of the following ASTM specifications: A 313/A 313M, A 368, A 478, A 492, A 493, A 580/A 580M and A 581/A 581M. 1.2 In case of conflicting requirements, the individual material specification and this general requirement specification shall prevail in the order named. 1.3 General requirements for flat products other than wire are covered in Specification A 480/A 480M. 1.4 General requirements for bar and billet products are covered in Specification A 484/A 484M. 1.5 The values stated in inch-pound units or SI (metric) units are to be regarded separately as standard; within the text and tables, the SI units are shown in brackets ([]). The values stated in each system are not exact equivalents; therefore, each system must be used independent of the other. Combining values from the two systems may result in nonconformance with the specification. 1.6 Unless the order specifies the applicable metric specification designation, the material shall be furnished in the inch-pound units. |
||||||||||||||||||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||||||||||||||||||
|
Doporučujeme:
