Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

Doplňující informace

ASTM A484/A484M-05

Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

Automaticky přeložený název:

Standardní specifikace pro všeobecné požadavky na tyčí z nerezavějící oceli , ingoty, a výkovků

NORMA vydána dne 1.3.2005

Jazyk
Provedení	Online zabezpečené PDF - 2 004.00 Kč Tištěné - 2 004.00 Kč
Dostupnost	SKLADEM
Cena	2004.00 Kč bez DPH
2 004.00 Kč

Informace o normě:

Označení normy: ASTM A484/A484M-05
Poznámka: NEPLATNÁ
Datum vydání normy: 1.3.2005
Kód zboží: NS-2709
Počet stran: 12
Přibližná hmotnost: 36 g (0.08 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM A484/A484M-05 :

Keywords:

general delivery requirements, stainless steel bars, stainless steel billets, stainless steel forgings, stainless steel shapes, ICS Number Code 77.140.20 (Steels of high quality)

Doplňující informace

1. Scope

1.1 This specification covers general requirements that shall apply to wrought stainless steel bars, shapes, forgings, and billets or other semi-finished material (except wire) for forging, under the latest revision of each of the following ASTM specifications: A 276, A 314, A 458, A 473, A 477, A 479/A 479M, A 564/A 564M, A 565, A 582/A 582M, A 638/A 638M, A 705/A 705M, and A 831/A 831M.

1.2 In the case of conflict between a requirement of a product specification and a requirement of this specification, the product specification shall prevail. In the case of conflict between a requirement of the product specification or a requirement of this specification and a more stringent requirement of the purchase order, the purchase order shall prevail. The purchase order requirements shall not take precedence if they, in any way, violate the requirements of the product specification or this specification; for example, by waiving a test requirement or by making a test requirement less stringent.

1.3 The requirements for introduction of new materials in specifications referencing this specification are given in .

1.4 General requirements for flat-rolled stainless steel products other than bar are covered in Specification A 480/A 480M.

1.5 General requirements for wire products in coils are covered in Specification A 555/A 555M.

1.6 The values stated in either inch-pound units or SI (metric) units are to be regarded separately as the standard; within the text and tables, the SI units are shown in [brackets]. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.

1.7 Unless the order specifies an "M" designation, the material shall be furnished to inch-pound units.

2. Referenced Documents

A564/A564M-25	Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A565/A565M-10(2025)	Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
A582/A582M-22	Standard Specification for Free-Machining Stainless Steel Bars
A638/A638M-23	Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A700-14(2019)	Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A751-25	Standard Test Methods and Practices for Chemical Analysis of Steel Products
A705/A705M-23	Standard Specification for Age-Hardening Stainless Steel Forgings
A831-A831M-95(2000)	Standard Specification for Austenitic and Martensitic Stainless Steel Bars, Billets, and Forgings for Liquid Metal Cooled Reactor Core Components (Withdrawn 2005)
E112-25	Standard Test Methods for Determining Average Grain Size
E139-24	Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
Fed. Std. No. 123	Marking for Shipment (Civil Agencies)
A479/A479M-25	Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A480/A480M-25b	Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip (Includes all amendments and changes 9/10/2025).
A262-15(2021)	Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A276-13	Standard Specification for Stainless Steel Bars and Shapes
A314-25	Standard Specification for Stainless Steel Billets and Bars for Forging
A370-26	Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A458-88	Specification for Hot-Worked, Hot-Cold-Worked, and Cold-Worked Alloy Steel Bars for High Strength at Elevated Temperatures
A473-26	Standard Specification for Stainless Steel Forgings
A477-	Withdrawn 1988: Specification for Hot-Worked, Hot-Cold Worked and Cold-Worked Alloy Steel Forgings and Forging Billets for High Strength at Elevated Temperatures
A555/A555M-23	Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

MIL-STD-129	Marking for Shipment and Storage
MIL-STD-163	Preservation of Steel Products for Shipment (Storage and Overseas Shipment)
Fed Std. No. 183

Doporučujeme:

EviNor - Řízení a aktualizace českých norem

Zde máte možnost přizpůsobit si nastavení souborů cookies v souladu s vlastními preferencemi.

Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů.