Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM A460-11(2021)
Standard Specification for Copper-Clad Steel Wire Strand
Přeložit název
NORMA vydána dne 1.3.2021
Informace o normě:
Označení normy: ASTM A460-11(2021)
Datum vydání normy: 1.3.2021
Kód zboží: NS-1021923
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM A460-11(2021) :
This specification covers copper-clad steel wire strand composed of a number of round steel, copper-clad wires, for use as guys, messengers, span wires, and for similar purposes where electrical conductance is not a requirement. The strand is classified based on the minimum breaking strength and number of wires in the strand. Each wire in the strand shall be composed of a steel core made from steel produced by commercially-accepted steel-making process, with a substantially uniform and continuous copper cladding thoroughly bonded to it throughout. Each wire in the strand shall be of such quality that, when drawn to a specified size and when fabricated into strand, the finished copper-clad steel wire strand shall have the prescribed properties and characteristics. Strands of varying minimum breaking strength shall conform to the prescribed package size of coils or reels. The minimum thickness of the copper cladding on wires taken from the finished strand shall not be less than the specified values. Mechanical properties like breaking strength and elongation shall be determined. Torsion test and wrap test shall also be conducted on the test specimens.
Keywords:
coatings—metallic, copper clad materials, steel wire—copper clad, steel wire strand,, ICS Number Code 29.060.10 (Wires)
Doplňující informace
| 1. Scope | ||
|
1.1?This specification covers copper-clad steel wire strand composed of a number of round steel, copper-clad wires, for use as guys, messengers, span wires, and for similar purposes where electrical conductance is not a requirement. 1.2?The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||
| 2. Referenced Documents | ||
|
Doporučujeme:
Aktualizace technických norem
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
