Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM A450/A450M-21
Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
Přeložit název
NORMA vydána dne 1.11.2021
Informace o normě:
Označení normy: ASTM A450/A450M-21
Poznámka: NEPLATNÁ
Datum vydání normy: 1.11.2021
Kód zboží: NS-1041931
Počet stran: 10
Přibližná hmotnost: 30 g (0.07 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM A450/A450M-21 :
Keywords:
alloy steel tube, austenitic stainless steel, carbon steel tube, general delivery, stainless steel tube, steel tube,, ICS Number Code 23.040.10 (Iron and steel pipes)
Doplňující informace
| 1. Scope | |
|
1.1?This specification Title of Specification |
ASTM DesignationA |
|
? |
|
|
Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler Tubes |
A178/A178M |
|
Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes |
A179/A179M |
|
Seamless Carbon Steel Boiler Tubes for High-Pressure Service |
A192/A192M |
|
Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
A210/A210M |
|
Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
A214/A214M |
|
Seamless and Electric-Welded Low-Alloy Steel Tubes |
A423/A423M |
|
Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins |
A498/A498M |
|
Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes |
A556/A556M |
|
Seamless, Cold-Drawn Carbon Steel Tubing for Hydraulic System Service |
A822/A822M |
1.2?One or more of Sections 6.3, 7, 8, 19, 20, 21, 22, 22.1, 24, and 25 apply when the product specification or purchase order has a requirement for the test or analysis described by these sections.
1.3?In case of conflict between a requirement of the product specification and a requirement of this general requirement specification only the requirement of the product specification need be satisfied.
1.4?The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the M designation (SI) of the product specification is specified in the order.
1.5?This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
|
Standard Practice for Commercial Packaging |
|
|
Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
|
|
Standard Test Method for Pneumatic Leak Testing of Tubing |
|
|
Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes |
|
|
Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes |
|
|
Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service |
|
|
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes |
|
|
Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes |
|
|
Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe |
|
|
Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins |
|
|
Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes |
|
|
Fed. Std. No. 183 |
Continuous Identification Marking of Iron and Steel Products Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098. |
|
Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products |
|
|
Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
|
|
Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys (Includes all amendments and changes 4/15/2026). |
|
|
Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service |
|
|
Standard Test Methods and Practices for Chemical Analysis of Steel Products |
|
|
Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment |
|
|
Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes |
|
|
Standard Test Methods and Definitions for Mechanical Testing of Steel Products |
|
|
Standard Practice for Eddy Current Examination of Steel Tubular Products |
|
|
Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing |
|
|
Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing |
|
|
Standard Test Methods for Mechanical Testing of Steel Products´Metric |
