ASTM A587-96(2012)..
ASTM A589/A589M-06(2..
ASTM A608/A608M-14..
ASTM A618/A618M-04(2..
ASTM A632-04(2014)..
ASTM A671/A671M-14..
Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM A409/A409M-15
Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
Automaticky přeložený název:
Standardní podmínky pro svařované ocelové s velkým průměrem austenitické oceli trubky pro agresivní nebo High-Provozní teplota
NORMA vydána dne 1.3.2015
Informace o normě:
Označení normy: ASTM A409/A409M-15
Poznámka: NEPLATNÁ
Datum vydání normy: 1.3.2015
Kód zboží: NS-583422
Počet stran: 7
Přibližná hmotnost: 21 g (0.05 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM A409/A409M-15 :
Keywords:
ICS Number Code 23.040.10 (Iron and steel pipes)
Doplňující informace
| 1. Scope | ||||||||||||||||||||||||
|
1.1 This specification2 covers straight seam or spiral seam electric-fusion-welded, light-wall, austenitic chromium-nickel alloy steel pipe for corrosive or high-temperature service. The sizes covered are NPS 14 to 30 with extra light (Schedule 5S) and light (Schedule 10S) wall thicknesses. Table X1.1 shows the wall thickness of Schedule 5S and 10S pipe. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification. 1.2 Several grades of alloy steel are covered as indicated in Table 1. 1.3 Optional supplementary requirements
are provided. These call for additional tests to be made, and when
desired shall be stated in the order, together with the number of
such tests required.
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order. Note 1: The dimensionless designator NPS (nominal pipe size)
has been substituted in this standard for such traditional terms as
|
A?5.9
|
Corrosion-Resisting Chromium and Chromium-Nickel Steel Welding Rods and Bare Electrodes
|
A?5.4
|
Corrosion-Resisting Chromium and Chromium-Nickel Steel Covered Welding Electrodes
|
A?5.30
|
Consumable Weld Inserts for Gas Tungsten Arc Welding
|
A?5.22
|
Flux Cored Arc Welding
|
Section IX Available from American Society of Mechanical Engineers (ASME), ASME International Headquarters, Two Park Ave., New York, NY 10016-5990, http://www.asme.org.
|
|
|
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
|
|
Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
|
|
Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip (Includes all amendments and changes 11/7/2023).
|
A?5.11
|
Nickel and Nickel-Alloy Covered Welding Electrodes
|
A?5.14
|
Nickel and Nickel-Alloy Bare Welding Rods and Electrodes
|
SAE J1086
|
Practice for Numbering Metals and Alloys (UNS) Available from Society of Automotive Engineers (SAE), 400 Commonwealth Dr., Warrendale, PA 15096-0001, http://www.sae.org.
|
|
Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
Podobné normy:
Historická
1.3.2012
Historická
1.3.2012
Historická
1.10.2014
Historická
1.4.2010
Historická
1.10.2014
Historická
1.3.2014
Doporučujeme:
EviZak - všechny zákony včetně jejich evidence na jednom místě
Poskytování aktuálních informací o legislativních předpisech vyhlášených ve Sbírce zákonů od roku 1945.
Aktualizace 2x v měsíci !
Chcete vědět více informací? Podívejte se na tuto stránku.
