Pozor!

Ve Vašem prohlížeči není aktuálně povoleno spouštění Javascriptu. Je možné, že některé funkce nebudou fungovat správně. Pro plnou funkčnost internetového obchodu doporučujeme povolit Javascript. Zde jsou instrukce jak povolit JavaScript ve Vašem webovém prohlížeči.

Zobrazovaná měna: Kč

Zobrazení ceny: bez DPH

NEPLATNÁ ASTM A335/A335M-11 1.10.2011 náhled

Doplňující informace

ASTM A335/A335M-11

Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

Automaticky přeložený název:

Standardní specifikace pro bezešvé feritické legované oceli Trubka pro High-provozní teploty

NORMA vydána dne 1.10.2011

Jazyk
Provedení	PDF - okamžité stažení - 1 923.90 Kč Tištěné - 1 923.90 Kč
Dostupnost	SKLADEM
Cena	1 923.90 Kč bez DPH
1 923.90 Kč

Informace o normě:

Označení normy: ASTM A335/A335M-11
Poznámka: NEPLATNÁ
Datum vydání normy: 1.10.2011
Kód zboží: NS-2106
Počet stran: 9
Přibližná hmotnost: 27 g (0.06 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM

Tisk

Odeslat známému

Dotaz

Anotace textu normy ASTM A335/A335M-11 :

Keywords:

alloy steel pipe, high temperature service, seamless steel pipe, steel pipe, temperature service applications: Alloy steel pipe--specifications, Ferritic steel pipe--specifications, High-temperature service applications--steel pipe, Hydrostatic testing, Seamless steel pipe--specifications, ICS Number Code 23.040.10 (Iron and steel pipes)

Doplňující informace

1. Scope

1.1 This specification covers nominal wall and minimum wall seamless ferritic alloy-steel pipe intended for high-temperature service. Pipe ordered to this specification shall be suitable for bending, flanging (vanstoning), and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics.

1.2 Several grades of ferritic steels (see Note 1) are covered. Their compositions are given in Table 1.

Note 1—Ferritic steels in this specification are defined as low- and intermediate-alloy steels containing up to and including 10 % chromium.

1.3 Supplementary requirements (S1 to S7) of an optional nature are provided. These supplementary requirements call for additional tests to be made, and when desired, shall be so stated in the order together with the number of such tests required.

1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.

Note 2—The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as “nominal diameter,” “size,” and “nominal size.”

TABLE 1 Chemical Requirements

Grade	UNS Designa- tion^A	Composition, %
Grade	UNS Designa- tion^A	Carbon	Man- ganese	Phos- phorus, max	Sulfur, max	Silicon	Chromium	Molybde- num	Others
P1	K11522	0.10–0.20	0.30–0.80	0.025	0.025	0.10–0.50	. . .	0.44–0.65	. . .
P2	K11547	0.10–0.20	0.30–0.61	0.025	0.025	0.10–0.30	0.50–0.81	0.44–0.65	. . .
P5	K41545	0.15 max	0.30–0.60	0.025	0.025	0.50 max	4.00–6.00	0.45–0.65	. . .
P5b	K51545	0.15 max	0.30–0.60	0.025	0.025	1.00–2.00	4.00–6.00	0.45–0.65	. . .
P5c	K41245	0.12 max	0.30–0.60	0.025	0.025	0.50 max	4.00–6.00	0.45–0.65	. . .^B
P9	S50400	0.15 max	0.30–0.60	0.025	0.025	0.25–1.00	8.00–10.00	0.90–1.10	. . .
P11	K11597	0.05–0.15	0.30–0.60	0.025	0.025	0.50–1.00	1.00–1.50	0.44–0.65	. . .
P12	K11562	0.05–0.15	0.30–0.61	0.025	0.025	0.50 max	0.80–1.25	0.44–0.65	. . .
P15	K11578	0.05–0.15	0.30–0.60	0.025	0.025	1.15–1.65	. . .	0.44–0.65	. . .
P21	K31545	0.05–0.15	0.30–0.60	0.025	0.025	0.50 max	2.65–3.35	0.80–1.06	. . .
P22	K21590	0.05–0.15	0.30–0.60	0.025	0.025	0.50 max	1.90–2.60	0.87–1.13	. . .
P23	K41650	0.04–0.10	0.10–0.60	0.030 max	0.010 max	0.50 max	1.90–2.60	0.05–0.30	V 0.20–0.30 Cb 0.02–0.08 B 0.0010–0.006 N 0.015 max Al 0.030 max W 1.45–1.75 Ni 0.40 max Ti 0.005–0.060 Ti/N ≥ 3.5^C
P24	K30736	0.05–0.10	0.30–0.70	0.020	0.010	0.15–0.45	2.20–2.60	0.90–1.10	V 0.20–0.30 Ti 0.06–0.10 N 0.012 max Al 0.02 max B 0.0015–0.007
P36	K21001	0.10–0.17	0.80–1.20	0.030 max	0.025 max	0.25–0.50	0.30 max	0.25–0.50	Ni 1.00-1.30 Cu 0.50-0.80 Cb 0.015-0.045 V 0.02 max N 0.02 max Al 0.050 max
P91	K91560	0.08–0.12	0.30–0.60	0.020	0.010	0.20–0.50	8.00–9.50	0.85–1.05	V 0.18–0.25
									N 0.030–0.070
									Ni 0.40 max
									Al 0.02 max
									Cb 0.06–0.10
									Ti 0.01 max
									Zr 0.01 max
P92	K92460	0.07–0.13	0.30–0.60	0.020	0.010	0.50 max	8.50–9.50	0.30–0.60	V 0.15–0.25 N 0.03–0.07 Ni 0.40 max Al 0.02 max Cb 0.04–0.09 W 1.5–2.00 B 0.001–0.006 Ti 0.01 max Zr 0.01 max
P122	K92930	0.07–0.14	0.70 max	0.020	0.010	0.50 max	10.00–11.50	0.25–0.60	V 0.15–0.30 W 1.50–2.50 Cu 0.30–1.70 Cb 0.04–0.10 B 0.0005–0.005 N 0.040–0.100 Ni 0.50 max Al 0.020 max Ti 0.01 max Zr 0.01 max
P911	K91061	0.09–0.13	0.30–0.60	0.020 max	0.010 max	0.10–0.50	8.5–9.5	0.90–1.10	V 0.18–0.25 Ni 0.40 max Cb 0.060–0.10 B 0.0003–0.006 N 0.04–0.09 Al 0.02 max W 0.90–1.10 Ti 0.01 max Zr 0.01 max

^A New designation established in accordance with Practice E527 and SAE J1086, Practice for Numbering Metals and Alloys (UNS).

^B Grade P 5c shall have a titanium content of not less than 4 times the carbon content and not more than 0.70 %; or a columbium content of 8 to 10 times the carbon content.

^C Alternatively, in lieu of this ratio minimum, the material shall have a minimum hardness of 275 HV in the hardened condition, defined as after austenitizing and cooling to room temperature but prior to tempering. Hardness testing shall be performed at mid-thickness of the product. Hardness test frequency shall be two samples of product per heat treatment lot and the hardness testing results shall be reported on the material test report.

2. Referenced Documents

E527-23	Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
A999/A999M-23	Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
E213-22	Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing
E309-16	Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation
E381-22	Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
E92-23	Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
B36.10M	Welded and Seamless Wrought Steel Pipe
E570-20	Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

Doporučujeme:

EviNor - Řízení a aktualizace českých norem