Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM A3-01(2019)
Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
Přeložit název
NORMA vydána dne 1.3.2019
Informace o normě:
Označení normy: ASTM A3-01(2019)
Datum vydání normy: 1.3.2019
Kód zboží: NS-945332
Počet stran: 3
Přibližná hmotnost: 9 g (0.02 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM A3-01(2019) :
This specification covers steel joint bars of low-carbon, medium-carbon, and high-carbon grades (Grades 1, 2, and 3) for railway applications. Steel shall be made through basic-oxygen or electric-furnace processes and cast through continuous process or in ingots. An analysis of each heat or cast shall be made to determine the percentage compositions of carbon, manganese, phosphorus, and sulfur. Tension test shall also be made to conform to specified tensile strength and elongation values. Guidelines on the dimensions and physical variations of joint bars are given. Inspection, rejection, rehearing, certification, and product marking procedures are cited.
Keywords:
rail, railway applications, steel joint bars,, ICS Number Code 77.140.70 (Steel profiles)
Doplňující informace
| 1. Scope | ||||
|
1.1 This specification covers steel joint bars for connecting steel rails in mine, industrial, and standard railroad track. 1.2 Three grades of joint bars are defined for applications where non-heat treated bars are suitable: 1.2.1 Grade 1, low-carbon, primarily for industrial and mine use. 1.2.2 Grade 2, medium-carbon, primarily for industrial and mine use. 1.2.3 Grade 3, high-carbon, for general use in standard railroad track. They may be used in the production of insulated track joints. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||
| 2. Referenced Documents | ||||
|
Doporučujeme:
Aktualizace technických norem
Chcete mít jistotu, že používáte pouze platné technické normy?
Nabízíme Vám řešení, které Vám zajistí měsíční přehled o aktuálnosti norem, které používáte.
Chcete vědět více informací? Podívejte se na tuto stránku.
