Cookies
Potřebujeme váš souhlas k využití jednotlivých dat, aby se vám mimo jiné mohly ukazovat informace týkající se vašich zájmů. Souhlas udělíte kliknutím na tlačítko „OK“.
ASTM A295/A295M-14(2020)
Standard Specification for High-Carbon Anti-Friction Bearing Steel
Přeložit název
NORMA vydána dne 1.3.2020
Informace o normě:
Označení normy: ASTM A295/A295M-14(2020)
Datum vydání normy: 1.3.2020
Kód zboží: NS-988543
Počet stran: 5
Přibližná hmotnost: 15 g (0.03 liber)
Země: Americká technická norma
Kategorie: Technické normy ASTM
Kategorie - podobné normy:
Anotace textu normy ASTM A295/A295M-14(2020) :
This specification covers high-carbon bearing-quality steel to be used in the manufacture of anti-friction bearings. Materials shall conform to chemical compositions as specified herein, and to physical size and shape as agreed upon between the manufacturer and purchaser. Steels shall exhibit fine fracture grain size when quenched from normal austenitizing temperatures. Decarburization and surface imperfections shall not exceed the limits also specified herein. When annealing is specified in the order, the steel shall adhere to hardness requirements and have a completely spheroidized microstructure, which shall accordingly be rated and reported as carbide size, carbide network, and lamellar content.
Keywords:
ICS Number Code 77.140.10 (Heat-treatable steels)
Doplňující informace
| 1. Scope | ||||||||||||||||||||
|
1.1 This specification covers high-carbon bearing-quality steel to be used in the manufacture of anti-friction bearings. 1.2 Supplementary requirements of an optional nature are provided and when desired shall be so stated in the order. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. |
||||||||||||||||||||
| 2. Referenced Documents | ||||||||||||||||||||
|
Odebírejte informace o nově vydaných normách ZDARMA:
Chcete pravidelně odebírat informace o nově vycházejících normách z celého světa a to zcela zdarma?
Přihlašte se k odběru. Vše je velice jednoduché a absolutně ZDARMA.
Na výběr máte vydavatele z celého světa.
